Diff for "Outdated_Cytoscape_3.0/Enhanced Test Plan/UI Test Cases/Edges sub menu"

Differences between revisions 2 and 5 (spanning 3 versions)

UI Test Cases for Select Menu - Edges sub menu

Preconditions	Test Case ID	Instructions	Expected Results	Windows		Mac
Preconditions	Test Case ID	Instructions	Expected Results	Date Executed	Pass/Fail	Date Executed	Pass/Fail
1. Start Cytoscape 2. Import a network file (eg. galFiltered.sif) 3. Click on Select from the toolbar	S3.1	1. Click and drag over a portion of the graph 2. Choose Edges → Invert edge selection	The edges that were selected should be deselected and the edges that were not initially selected should be highlighted			May 22nd 09	P
	S3.2	1. Repeat step 1 from S3.1 2. Choose Edges → Hide edge selection	The selected edges should now be invisible			May 22nd 09	P
	S3.3	Choose Edges → Show all edges	The edges that were hidden in S3.3 should now be visible with all the other edges in the network			May 22nd 09	P
	S3.4	Choose Edges → Select all edges	All the edges in the network should be selected			May 22nd 09	P
	S3.5	Choose Edges → Deselect all edges	All the edges in the network should be deselected and not highlighted			May 22nd 09	P
	S3.6	1. Hold shift and click on 5 nodes 2. Choose Edges → Select adjacent edges	All the edges connected to these nodes should be selected			May 22nd 09	P
	S3.7	1. Select an edge 2. Hold Ctrl (or command) and click on a point on the edge 3. Repeat step 2 further up the edge 4. Click on the edge and drag it into a zig-zag 5. Choose Edges → Smooth selected edges	The edge should change from a zig-zag to a smooth curve			May 22nd 09	P
	S3.8	1. Select the curved edge created in S3.7 2. Choose Edge → Straighten selected edge	The curved edge should now be a straight zig-zag again			May 22nd 09	P

Outdated_Cytoscape_3.0/Enhanced Test Plan/UI Test Cases/Edges sub menu (last edited 2011-02-24 15:41:20 by PietMolenaar)

-  ← Revision 2 as of 2009-05-22 18:49:35 →
  Size: 1843
  Editor: 142
  Comment:
+  ← Revision 5 as of 2011-02-24 15:41:20 →
  Size: 2021
  Editor: PietMolenaar
  Comment: Start afresh with Cytoscape 3 documentation
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
+## page was renamed from Cytoscape_3.0/Enhanced Test Plan/UI Test Cases/Edges sub menu

## page was renamed from Edges sub menu
-Line 5:
+Line 7:
-||<|8> 1. Start Cytoscape 2. Import a network file (eg. galFiltered.sif) 3. Click on Select from the toolbar||S3.1||1. Click and drag over a portion of the graph 2. Choose Edges → Invert edge selection||The edges that were selected should be deselected and the edges that were not initially selected should be highlighted|| || ||May 22nd 09||P||

||S3.2||1. Repeat step 1 from S3.1 2. Choose Edges → Hide edge selection||The selected edges should now be invisible|| || ||May 22nd 09||P||

||S3.3||1. Choose Edges → Show all edges||The edges that were hidden in S3.3 should now be visible with all the other edges in the network|| || ||May 22nd 09||P||

||S3.4||1. Choose Edges → Select all edges||All the edges in the network should be selected|| || ||May 22nd 09||P||

||S3.5||1. Choose Edges → Deselect all edges||All the edges in the network should be deselected and not highlighted|| || ||May 22nd 09||P||

||S3.6||1. Hold shift and click on 5 nodes 2. Choose Edges → Select adjacent edges||All the edges connected to these nodes should be selected|| || ||May 22nd 09||P||

||S3.7||1. Select an edge 2. Hold Ctrl (or command) and click on a point on the edge 3. Repeat step 2 further up the edge 4. Click on the edge and drag it into a zig-zag  5. Choose Edges → Smooth selected edges||The edge should change from a zig-zag to a smooth curve|| || ||May 22nd 09||P||

||S3.8||1. Select the curved edge created in S3.7 2. Choose Edge → Straighten selected edge||The curved edge should now be a straight zig-zag again|| || ||May 22nd 09||P||
+||<|8> 1. Start Cytoscape <<BR>>2. Import a network file (eg. galFiltered.sif) <<BR>>3. Click on Select from the toolbar||S3.1||1. Click and drag over a portion of the graph <<BR>>2. Choose Edges → Invert edge selection||The edges that were selected should be deselected and the edges that were not initially selected should be highlighted|| || ||May 22nd 09||P||

||S3.2||1. Repeat step 1 from S3.1 <<BR>>2. Choose Edges → Hide edge selection||The selected edges should now be invisible|| || ||May 22nd 09||P||

||S3.3||Choose Edges → Show all edges||The edges that were hidden in S3.3 should now be visible with all the other edges in the network|| || ||May 22nd 09||P||

||S3.4||Choose Edges → Select all edges||All the edges in the network should be selected|| || ||May 22nd 09||P||

||S3.5||Choose Edges → Deselect all edges||All the edges in the network should be deselected and not highlighted|| || ||May 22nd 09||P||

||S3.6||1. Hold shift and click on 5 nodes <<BR>>2. Choose Edges → Select adjacent edges||All the edges connected to these nodes should be selected|| || ||May 22nd 09||P||

||S3.7||1. Select an edge <<BR>>2. Hold Ctrl (or command) and click on a point on the edge <<BR>>3. Repeat step 2 further up the edge <<BR>>4. Click on the edge and drag it into a zig-zag  <<BR>>5. Choose Edges → Smooth selected edges||The edge should change from a zig-zag to a smooth curve|| || ||May 22nd 09||P||

||S3.8||1. Select the curved edge created in S3.7 <<BR>>2. Choose Edge → Straighten selected edge||The curved edge should now be a straight zig-zag again|| || ||May 22nd 09||P||