Size: 43228
Comment:
|
Size: 42859
Comment:
|
Deletions are marked like this. | Additions are marked like this. |
Line 40: | Line 40: |
Cytoscape 3 has several sample styles. You can try these to examine how Styles change the appearance of a network. The following is a list of network views based upon sample styles applied to the ''galFiltered.sif'' network : | Cytoscape 3 has several sample styles. Below are a few examples of these applied to the ''galFiltered.sif'' network : |
Line 45: | Line 45: |
The '''Style''' interface is located under the '''Style''' tab of the '''Control Panel'''. | The '''Style''' interface is located under the '''Style''' panel of the '''Control Panel'''. |
Line 48: | Line 48: |
This interface allows you to create/delete/view/switch between different styles using the Current Style options. The panel displays the mapping details for a given style and is used to edit these details as well. |
This interface allows you to create/delete/view/switch between different styles using the Current Style options. The panel displays the mapping details for a given style and is used to edit these details as well. * At the top of the interface, there is a drop-down menu for selecting a pre-defined style. There is also an '''Options''' drop-down with with options to rename, remove, create and copy a Style, and an option to create a legend for the selected Style. * The main area of the interface is composed of three tabs, for Node, Edge and Network. * Each tab contains a list of properties relevant to the current style. At the top of the list a '''Properties''' drop-down allows you to add additional properties to the list. * Each property entry in the list has 4 columns: * The '''Default Value''' shows just that, the default value for the property. Clicking on the '''Default Value''' column for any property allows you to change the default value. * '''Mapping''' displays the type of mapping currently in use for the property. Clicking on the '''Mapping''' column for any property expands the property entry to show the interface for editing the mapping. Details on the mapping types provided [[#mappers|here]]. * '''Bypass''' displays any style bypass for a selected node or edge. Note that a node/edge or subset of nodes/edges must be selected to activate the '''Bypass''' column. Clicking on the '''Bypass''' column for selected node(s)/edge(s) allows you to enter a bypass for that property for selected node(s)/edge(s). The '''Default Value''' is used when no mapping is defined for a property, or for nodes/edges not covered by a mapping for a particular property. If a '''Mapping''' is defined for a property, this defines the style for all or a subset of nodes/edges, depending on how the mapping is defined. A '''Bypass''' on a specific set of nodes/edges will bypass and override both the default value and defined mapping. |
Line 51: | Line 61: |
The Cytoscape distribution includes several predefined styles to get you started. To examine these styles, try out the following example: | The Cytoscape distribution includes several predefined styles to get you started. To examine a few styles, try out the following example: |
Line 55: | Line 65: |
* Load a sample session file: From the main menu, select '''''File → Open''''', and select the file ''sampleData/galFiltered.cys''. * The session file includes a network, some annotations, and sample visual styles. By default, the '''Sample for galFiltered''' style is selected. Gene expression values for each node are colored along a color gradient between red and green (where red represents a low expression ratio and green represents a high expression ratio, using thresholds set for the gal4RGexp experiment bundled with Cytoscape in the ''sampleData/galExpData.csv'' file). Also, node size is mapped to the degree of the node (number of edges connected to the node) and you can see the hubs of the network as larger nodes. See the sample screenshot below: |
* Load a sample session file: From the main menu, select '''File → Open''', and select the file ''sampleData/galFiltered.cys''. * The session file includes a network, some annotations, and sample styles. By default, the '''Sample for galFiltered''' style is selected. Gene expression values for each node are colored along a color gradient between red and green (where red represents a low expression ratio and green represents a high expression ratio, using thresholds set for the gal4RGexp experiment bundled with Cytoscape in the ''sampleData/galExpData.csv'' file). Also, node size is mapped to the degree of the node (number of edges connected to the node) and you can see the hubs of the network as larger nodes. See the sample screenshot below: |
Line 63: | Line 73: |
You can change the style by making a selection from the '''Current Style''' drop-down list, found at the top of the '''Style''' tab. | You can change the style by making a selection from the '''Current Style''' drop-down list, found at the top of the '''Style''' panel. |
Line 75: | Line 85: |
Additional sample styles are available in the {{{sampleStyles.xml}}} file in the ''sampleData'' directory. You can import the sample file from '''''File → Import → Visual Style File...'''''. == Visual Attributes, Graph Attributes and Visual Mappings == The Cytoscape Style interface uses three core concepts: * A ''visual attribute'' is any visual setting that can be applied to your network. For example, you can change all nodes from circles to squares by changing the node shape visual attribute. * A ''network attribute'' is any data attribute associated with a node or an edge. For example, each edge in a network may be associated with a label, such as “pd” (protein-DNA interactions), or “pp” (protein-protein interactions). * A ''Visual Mapping'' maps network attributes to visual attributes. For example, a visual mapping can map all protein-DNA interactions to the color blue, and all protein-protein interactions to the color red. Cytoscape allows a wide variety of visual attributes to be controlled. These are summarized in the tables below. ||'''Visual Attributes Associated with Nodes''' ||'''Description''' || ||''Node Shape'' ||The shape of the node. || ||''Node Fill Color'' ||The color of the node. || ||''Node Selection'' ||The color of the node when selected. || ||''Node Transparency'' ||The opacity of the color of the node. Zero means totally transparent, and 255 is most opaque.|| ||''Node Border Paint'' ||The color of the border of the node. || ||''Node Border Transparency'' ||The opacity of the color of the border of the node. Allows for transparency. || ||''Node Border Line Type'' ||The type of line used for the border of the node. || ||''Node Border Width'' ||The width of the node border. || ||''Node Custom Graphics 1-9'' || A user-defined custom graphic that is displayed on the node. || ||''Node Custom Graphics Position 1-9'' || The position of each custom graphic. || ||''Node Label Font Face'' ||The font used for the node label. || ||''Node Label Font Size'' ||The size of the font used for the node label. || ||''Node Label'' ||The text used for the node label. || ||''Node Label Color'' ||The color of the node label. || ||''Node Label Transparency'' ||The transparency of the color of the node label. Allows for transparency. || ||''Node Label Position'' ||The position of the node label relative to the node. || ||''Node Label Width'' ||The maximum width of the node label. If the node label is wider than the specified width, Cytoscape will automatically wrap the label on space characters. Cytoscape will not hyphenate words, meaning that if a single word (i.e. no spaces) is longer than maximum width, the word will be displayed beyond the maximum width. || ||''Node Tooltip'' ||The text of the tooltip that appears when a mouse hovers over the node. || ||''Node Size'' ||The size of the node. Width and height will be equal. This visual property is mutually exclusive of ''Node Height'' and ''Node Width''. || ||''Node Height'' ||The height of the node. Height will be independent of width. This visual property is mutually exclusive of ''Node Size''. || ||''Node Width'' ||The width of the node. Width will be independent of height. This visual property is mutually exclusive of ''Node Size''. || ||''Node X Location'' ||X location of the node. Default value of this will be ignored. The value will be used only when mapping function is defined. || ||''Node Y Location'' ||Y location of the node. Default value of this will be ignored. The value will be used only when mapping function is defined. || ||''Node Visible'' ||Node is visible or not. By default, this value is set to ''true''. || |
Additional sample styles are available in the {{{sampleStyles.xml}}} file in the ''sampleData'' directory. You can import the sample file from '''File → Import → Visual Style File...'''. === List of Node, Edge and Network Properties === Cytoscape allows a wide variety of properties to be controlled. These are summarized in the tables below. ||'''Node Properties''' ||'''Description''' || ||''Shape'' ||The shape of the node. || ||''Fill Color'' ||The color of the node. || ||''Selection'' ||The color of the node when selected. || ||''Transparency'' ||The opacity of the color of the node. Zero means totally transparent, and 255 is most opaque.|| ||''Border Paint'' ||The color of the border of the node. || ||''Border Transparency'' ||The opacity of the color of the border of the node. Allows for transparency. || ||''Border Line Type'' ||The type of line used for the border of the node. || ||''Border Width'' ||The width of the node border. || ||''Custom Graphics 1-9'' || A user-defined custom graphic that is displayed on the node. || ||''Custom Graphics Position 1-9'' || The position of each custom graphic. || ||''Label Font Face'' ||The font used for the node label. || ||''Label Font Size'' ||The size of the font used for the node label. || ||''Label'' ||The text used for the node label. || ||''Label Color'' ||The color of the node label. || ||''Label Transparency'' ||The transparency of the color of the node label. Allows for transparency. || ||''Label Position'' ||The position of the node label relative to the node. || ||''Label Width'' ||The maximum width of the node label. If the node label is wider than the specified width, Cytoscape will automatically wrap the label on space characters. Cytoscape will not hyphenate words, meaning that if a single word (i.e. no spaces) is longer than maximum width, the word will be displayed beyond the maximum width. || ||''Tooltip'' ||The text of the tooltip that appears when a mouse hovers over the node. || ||''Size'' ||The size of the node. Width and height will be equal. This visual property is mutually exclusive of ''Node Height'' and ''Node Width''. || ||''Height'' ||The height of the node. Height will be independent of width. This visual property is mutually exclusive of ''Node Size''. || ||''Width'' ||The width of the node. Width will be independent of height. This visual property is mutually exclusive of ''Node Size''. || ||''X Location'' ||X location of the node. Default value of this will be ignored. The value will be used only when mapping function is defined. || ||''Y Location'' ||Y location of the node. Default value of this will be ignored. The value will be used only when mapping function is defined. || ||''Visible'' ||Node is visible or not. By default, this value is set to ''true''. || |
Line 114: | Line 118: |
||'''Visual Attributes Associated with Edges''' ||'''Description''' || ||''Edge Stroke Color (Unselected)'' ||The color of the edge. || ||''Edge Stroke Color (Selected)'' ||The color of the edge when selected. || ||''Edge Transparency'' ||The opacity of the color of the edge. Allows for transparency. || ||''Edge Line Type'' ||The type of stoke used to render the line (solid, dashed, etc.) || ||''Edge Width'' ||The width of the line. || ||''Edge Label'' ||The text used for the edge label. || ||''Edge Label Color'' ||The color of the edge label. || ||''Edge Label Transparency'' ||The opacity of the color of the edge label. Allows for transparency. || ||''Edge Label Font Face'' ||The font used for the edge label. || ||''Edge Label Font Size'' ||The size of the font used for the edge label. || ||''Edge Tooltip'' ||The text of the tooltip that appears when a mouse hovers over the edge. || ||''Edge Source Arrow Unselected Paint'' ||The color of the arrow on the source node end of the edge. || ||''Edge Source Arrow Selected Paint'' ||The selected color of the arrow on the source node end of the edge. || ||''Edge Source Arrow Shape'' ||The shape of the arrow on the source node end of the edge. || ||''Edge Target Arrow Unselected Paint'' ||The color of the arrow on the target node end of the edge. || ||''Edge Target Arrow Selected Paint'' ||The selected color of the arrow on the target node end of the edge. || ||''Edge Target Arrow Shape'' ||The shape of the arrow on the target node end of the edge. || ||''Edge Bend'' ||The edge bend. Defines how the edge is rendered. Users can add multiple handles to define how to bend the edge line. || ||''Edge Curved'' ||If ''Egde Bend'' is defined, edges will be rendered as straight or curved lines. If this value is set to ''true'', edges will be drawn as curved lines. || ||''Edge Visible'' ||Edge is visible or not. By default, this value is set to ''true''. || ||'''Network Visual Properties''' ||'''Description''' || ||''Network Background Paint'' ||The background color of the network view. || ||''Network Title'' ||The title of the network view. || ||''Network Height'' ||The height of the network view. || ||''Network Width'' ||The width of the network view. || ||''Network Scale Factor'' ||The zoom level of the network view. || ||''Network Center X Location'' ||The X location of network view center. || ||''Network Center Y Location'' ||The Y location of network view center. || ||''Network Edge Selection'' ||Edges are selectable or not. If this is ''false'', users cannot select edges.|| ||''Network Node Selection'' ||Nodes are selectable or not. If this is ''false'', users cannot select nodes.|| |
||'''Edge Properties''' ||'''Description''' || ||''Stroke Color (Unselected)'' ||The color of the edge. || ||''Stroke Color (Selected)'' ||The color of the edge when selected. || ||''Transparency'' ||The opacity of the color of the edge. Allows for transparency. || ||''Line Type'' ||The type of stoke used to render the line (solid, dashed, etc.) || ||''Width'' ||The width of the line. || ||''Label'' ||The text used for the edge label. || ||''Label Color'' ||The color of the edge label. || ||''Label Transparency'' ||The opacity of the color of the edge label. Allows for transparency. || ||''Label Font Face'' ||The font used for the edge label. || ||''Label Font Size'' ||The size of the font used for the edge label. || ||''Tooltip'' ||The text of the tooltip that appears when a mouse hovers over the edge. || ||''Source Arrow Unselected Paint'' ||The color of the arrow on the source node end of the edge. || ||''Source Arrow Selected Paint'' ||The selected color of the arrow on the source node end of the edge. || ||''Source Arrow Shape'' ||The shape of the arrow on the source node end of the edge. || ||''Target Arrow Unselected Paint'' ||The color of the arrow on the target node end of the edge. || ||''Target Arrow Selected Paint'' ||The selected color of the arrow on the target node end of the edge. || ||''Target Arrow Shape'' ||The shape of the arrow on the target node end of the edge. || ||''Bend'' ||The edge bend. Defines how the edge is rendered. Users can add multiple handles to define how to bend the edge line. || ||''Curved'' ||If ''Egde Bend'' is defined, edges will be rendered as straight or curved lines. If this value is set to ''true'', edges will be drawn as curved lines. || ||''Visible'' ||Edge is visible or not. By default, this value is set to ''true''. || ||'''Network Properties''' ||'''Description''' || ||''Background Paint'' ||The background color of the network view. || ||''Title'' ||The title of the network view. || ||''Height'' ||The height of the network view. || ||''Width'' ||The width of the network view. || ||''Scale Factor'' ||The zoom level of the network view. || ||''Center X Location'' ||The X location of network view center. || ||''Center Y Location'' ||The Y location of network view center. || ||''Edge Selection'' ||Edges are selectable or not. If this is ''false'', users cannot select edges.|| ||''Node Selection'' ||Nodes are selectable or not. If this is ''false'', users cannot select nodes.|| === Available Shapes and Line Styles === |
Line 154: | Line 159: |
For each visual attribute, you can specify a default value or define a dynamic visual mapping. Cytoscape currently supports three different types of visual mappers: |
<<Anchor(mappers)>> === How Mappings Work === For each property, you can specify a default value or define a dynamic visual mapping. Cytoscape currently supports three different types of visual mappers: |
Line 158: | Line 164: |
* The values of network attributes are passed directly through to visual attributes. A passthrough mapper is typically used to specify node/edge labels. For example, a passthrough mapper can label all nodes with their common gene names. | * The values of network data attributes are passed directly through to properties. A passthrough mapper is typically used to specify node/edge labels. For example, a passthrough mapper can label all nodes with their common gene names. |
Line 160: | Line 166: |
* Discrete data attributes are mapped to discrete visual attributes. For example, a discrete mapper can map different types of molecules to different node shapes, such as rectangles for gene products and ellipses for metabolites | * Discrete data attributes are mapped to discrete properties. For example, a discrete mapper can map different types of molecules to different node shapes, such as rectangles for gene products and ellipses for metabolites. |
Line 162: | Line 168: |
* Continuous data are mapped to visual attributes. Depending on the visual attribute, there are three kinds of continuous mappers: i. '''Continuous-to-Continuous Mapper''': for example, you can map a continuous numerical value to a node size. i. '''Color Gradient Mapper''': This is a special case of continuous-to-continuous mapping. Continuous numerical values are mapped to a color gradient. |
* Continuous data are mapped to properties. Depending on the property, there are three kinds of continuous mappers: i. '''Continuous-to-Continuous Mapper''': for example, you can map a continuous numerical value to node size. i. '''Color Gradient Mapper''': This is a special case of continuous-to-continuous mapping. Continuous numerical values are mapped to a color gradient. |
Line 168: | Line 174: |
The table below shows visual mapper support for each visual property. | The table below shows mapper support for each property. |
Line 177: | Line 183: |
'''Node Visual Mappings''' ||||<style="text-align: center;">'''Node Visual Properties''' ||'''Passthrough Mapper''' ||'''Discrete Mapper''' ||'''Continuous Mapper''' || |
'''Node Mappings''' ||||<style="text-align: center;">'''Node Property''' ||'''Passthrough Mapper''' ||'''Discrete Mapper''' ||'''Continuous Mapper''' || |
Line 182: | Line 186: |
||''Node Transparency'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Node Border Paint'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Node Border Transparency'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Node Label Color'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Node Label Transparency'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || |
||''Transparency'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Border Paint'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Border Transparency'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Label Color'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Label Transparency'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || |
Line 188: | Line 192: |
||''Node Font Size'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Node Line Width'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Node Label Width'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || |
||''Font Size'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Line Width'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Label Width'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || |
Line 192: | Line 196: |
||''Node Shape'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">o || ||''Node Label'' ||<style="text-align: center;">+ ||<style="text-align: center;">+ ||<style="text-align: center;">o || ||''Node Tooltip'' ||<style="text-align: center;">+ ||<style="text-align: center;">+ ||<style="text-align: center;">o || ||''Node Font Family'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">o || ||''Node Label Position'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">o || ||''Node Show Nested Network'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">o || '''Edge Visual Mappings''' |
||''Shape'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">o || ||''Label'' ||<style="text-align: center;">+ ||<style="text-align: center;">+ ||<style="text-align: center;">o || ||''Tooltip'' ||<style="text-align: center;">+ ||<style="text-align: center;">+ ||<style="text-align: center;">o || ||''Font Family'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">o || ||''Label Position'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">o || ||''Nested Network Image Visible'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">o || '''Edge Mappings''' |
Line 205: | Line 207: |
||''Edge Transparency'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Edge Target Arrow Color'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Edge Source Arrow Color'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Edge Label Color'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Edge Label Transparency'' ||<style="text-align: center;">- ||<style="text-align: center;">+ ||<style="text-align: center;">+ || |
||''Transparency'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Target Arrow Color'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Source Arrow Color'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Label Color'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Label Transparency'' ||<style="text-align: center;">- ||<style="text-align: center;">+ ||<style="text-align: center;">+ || |
Line 211: | Line 213: |
||''Edge Font Size'' ||<style="text-align: center;">- ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Edge Label Width'' ||<style="text-align: center;">- ||<style="text-align: center;">+ ||<style="text-align: center;">+ || |
||''Font Size'' ||<style="text-align: center;">- ||<style="text-align: center;">+ ||<style="text-align: center;">+ || ||''Label Width'' ||<style="text-align: center;">- ||<style="text-align: center;">+ ||<style="text-align: center;">+ || |
Line 214: | Line 216: |
||''Edge Source Arrow Shape'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">o || ||''Edge Target Arrow Shape'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">o || ||''Edge Label'' ||<style="text-align: center;">+ ||<style="text-align: center;">+ ||<style="text-align: center;">o || ||''Edge Tooltip'' ||<style="text-align: center;">+ ||<style="text-align: center;">+ ||<style="text-align: center;">o || ||''Edge Font Family'' ||<style="text-align: center;">- ||<style="text-align: center;">+ ||<style="text-align: center;">o || === Text Passthrough Mapper === |
||''Source Arrow Shape'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">o || ||''Target Arrow Shape'' ||<style="text-align: center;">o ||<style="text-align: center;">+ ||<style="text-align: center;">o || ||''Label'' ||<style="text-align: center;">+ ||<style="text-align: center;">+ ||<style="text-align: center;">o || ||''Tooltip'' ||<style="text-align: center;">+ ||<style="text-align: center;">+ ||<style="text-align: center;">o || ||''Font Family'' ||<style="text-align: center;">- ||<style="text-align: center;">+ ||<style="text-align: center;">o || ==== Text Passthrough Mapper ==== |
Line 226: | Line 228: |
Line 229: | Line 230: |
==== Examples ==== | ===== Examples ===== |
Line 239: | Line 240: |
== Custom Graphics Manager == |
== Custom Graphics == For Cytoscape 2.8.0 and later versions, Cytoscape supports '''Custom Graphics''' for nodes. Using the Style interface, you can map Custom Graphics to nodes like any other visual property. Cytoscape has a set of graphics and you can also add your own graphics in the '''Custom Graphics Manager''', as well as remove or modify existing graphics. [[http://biosciencedbc.jp/taxonomy_icon/taxonomy_icon.cgi?lng=en|Taxonomy Icon]] set used in this section is created by Database Center for Life Science (DBCLS) and is distributed under Creative Commons License ([[http://creativecommons.org/licenses/by/2.1/jp/deed.en|CC BY 2.1.]]) === Managing Images with the Custom Graphics Manager === The '''Custom Graphics Manager''' is available under '''View → Open Custom Graphics Manager''': |
Line 242: | Line 251: |
For Cytoscape 2.8.0 and later versions, Cytoscape supports '''''Custom Graphics''''' for nodes. Using the same Style interface, you can map Custom Graphics to nodes like any other visual property. Cytoscape has a set of graphics and you can also add your own graphics in the '''''Custom Graphics Manager''''', as well as remove or modify existing graphics. [[http://biosciencedbc.jp/taxonomy_icon/taxonomy_icon.cgi?lng=en|Taxonomy Icon]] set used in this section is created by Database Center for Life Science (DBCLS) and is distributed under Creative Commons License ([[http://creativecommons.org/licenses/by/2.1/jp/deed.en|CC BY 2.1.]]) === Adding New Images to Cytoscape === The '''''Custom Graphics Manager''''' is available under '''View → Open Custom Graphics Manager'''. The interface supports drag and drop for image files and URLs. If you want to add images from a web browser or local file system, you can drag images from them and drop those images onto the list of images on the left. . {{attachment:add_custom_graphics.png}} If you want to add all images in a folder, press the '''+''' button on the bottom of the Custom Graphics Manager window. |
* You can add images by drag-and-drop of image files and URLs. If you want to add images from a web browser or local file system, you can drag images from them and drop those images onto the list of images on the left. {{attachment:add_custom_graphics.png}} If you want to add all images in a folder, press the '''+''' button on the bottom of the Custom Graphics Manager window. |
Line 255: | Line 259: |
=== Removing Images === To remove images from the current session's '''Custom Graphics''' library, simply select graphics from the list and press the '''-''' button. === Resizing Images === You can resize images by typing width/height in the text box. If ''Aspect Ratio'' box is checked, the width-height ratio is always synchronized. You can resize the image to the original size by pressing '''Original''' button. |
* To remove images from the current session's '''Custom Graphics''' library, simply select graphics from the list and press the '''-''' button. * Images can be resized by defining specific '''Width''' and '''Height''' information. If the ''Aspect Ratio'' box is checked, the width-height ratio is always synchronized. You can resize the image to the original size by pressing '''Original''' button. |
Line 265: | Line 265: |
'''Custom Graphics''' is a new type of property and you can use them from the standard '''Style''' user interface. There are nine '''Custom Graphics''' properties ('''Node Custom Paint 1 - 9'''). |
'''Custom Graphics''' is used and defined like any other property, through the '''Style''' interface. There are nine '''Custom Graphics''' properties ('''Node Custom Paint 1 - 9'''). To select a custom graphic, first add the Custom Graphics property to the '''Properties''' list in the '''Style''' interface. Next, click the '''Default Value''' column of the Custom Graphics property to bring up the Custom Graphics Selector. Select a graphic and click '''Apply'''. To remove a graphic mapping, click the '''Remove Mapping''' icon ({{attachment:RemoveMappingIcon.png}})from the Custom Graphics property in the properties list. . {{attachment:CustomGraphicsSelector.png}} By default, custom graphics objects are automatically resized to be consistent with the Node Size Visual Property. |
Line 273: | Line 277: |
==== Synchronize Custom Graphics to Node Size ==== /* . {{attachment:cg_size_dependency1.png}} */ By default, custom graphics objects are automatically resized to be consistent with the Node Size Visual Property. /* To control Custom Graphics size separately, uncheck the '''''Fit Custom Graphics to node''''' dependency. You can find this check box in the Default Editor's '''Dependencies''' panel. */ ==== Custom Graphics Selector ==== . {{attachment:CustomGraphicsSelector.png}} To select a custom graphic, first add the Custom Graphics property to the '''Properties''' list in the '''Style''' interface. Next, click the '''Default Value''' column of the Custom Graphics property to bring up the Custom Graphics Selector. Select a graphic and click '''Apply'''. To remove a graphic mapping, click the '''Remove Mapping''' icon ({{attachment:RemoveMappingIcon.png}})from the Custom Graphics property in the properties list. |
|
Line 295: | Line 286: |
. When you select '''''File → Quit''''', all of Custom Graphics in the Manager will be saved automatically to your Cytoscape setting directory. Usually, it's {{{YOUR_HOME_DIRECTORY/CytoscapeConfiguration/images3}}}. | . When you select '''File → Quit''', all of Custom Graphics in the Manager will be saved automatically to your Cytoscape setting directory. Usually, it's {{{YOUR_HOME_DIRECTORY/CytoscapeConfiguration/images3}}}. |
Line 298: | Line 289: |
---- |
|
Line 305: | Line 298: |
'''Step 1. Load a sample network.''' From the main menu, select ''File → Import → Network → File...'', and select {{{sampleData/galFiltered.sif}}}. '''Step 2. Create some node/edge statistics by Network Analyzer.''' Network Analyzer calculates some basic statistics for nodes and edges. From the main menu, select ''Tools → Network Analyzer → Network Analysis → Analyze Network'', and click ''OK''. Once the result is displayed, simply close the window. All statistics are stored as a regular table data. '''Step 3. Select the '''Style''' panel in the Control Panel. . {{attachment:NewVizMapper.png}} '''Step 4. Create a new style.''' Click the Options {{attachment:VizMapOptionIcon.png}} button, and select ''Create New Visual Style''. Then enter a name for your new visual style when prompted. You will see an empty visual style in the !VizMapper Main Panel, as shown below. . {{attachment:EmptyVisualStyle.png}} Since no mappings are set up yet, all visual attributes are listed in the ''Unused Properties'' category. From this panel, you can create node/edge mappings for all visual properties. '''Step 5. Edit default values.''' Open the Default Appearance Editor by clicking on the ''Defaults'' graphics window (shown below) in the ''!VizMapper'' Main Panel. . {{attachment:InitialDefaultEditor.png}} '''Step 6. Change the default node color and shape.''' To set the default node shape to triangles, click '''''Node Shape''''' in the Default Visual Properties list. A list of available node shapes will be shown. Click on the ''Triangle'' icon and then click the ''Apply'' button. The Default Appearance Editor will be automatically updated. You can edit other default values by clicking on visual attribute names on the list. In the example shown below, the node shape is set to ''Round Rectangle'', while the '''''Node Fill Color''''' is set to white. . {{attachment:TriangleDefaultEditor.png}} '''Step 7. Apply your settings.''' When you finish editing, click the ''Apply'' button at the bottom of the editor. Your new Visual Style will be applied to the current network, as shown below. . {{attachment:Tut1GalFiltered.png}} === Tutorial 2: Creating a New Visual Style with a Discrete Mapper === Now you have a network with new Visual Style. The following section demonstrates how to create a new visual style using a discrete mapper. The goal is to draw protein-DNA interactions as dashed lines, and protein-protein interactions as solid lines. '''Step 1. Choose a visual attribute.''' Double click the '''''Edge Stroke Color (Unselected)''''' entry listed in ''Unused Properties''. It will now appear at the top of the list, under the ''Edge Visual Property'' category (as shown below). '''Step 2. Choose an edge column.''' Click on the cell to the right of the ''Edge Stroke Color'' entry and select "interaction" from the dropdown list that appears. '''Step 3. Choose a mapping type.''' Set the "Discrete Mapping" option as the ''Mapping Type''. All available attribute values for "interaction" will be displayed, as shown below. . {{attachment:EdgeMapping2.png}} '''Step 4. Set the mapping relationship.''' Click the empty cell next to "pd" (protein-DNA interactions). On the right side of the cell, '''...''' and '''X''' buttons will appear. Click on the '''...''' button. A popup window will appear; select green or similar, and the change will immediately appear on the network window. . {{attachment:CellEditor1.png}} Repeat step 4 for "pp" (protein-protein interactions), but select a darker color as edge stroke color. Then repeat steps 3 through 4 for the ''Edge Line Type'' attribute. You can select the correct line style ("Dash" or "Solid") from the list. . {{attachment:EdgeMapping3.png}} |
'''Step 1. Load a sample network.''' From the main menu, select '''File → Import → Network → File...''', and select {{{sampleData/galFiltered.sif}}}. '''Step 2. Create some node/edge statistics by Network Analyzer.''' Network Analyzer calculates some basic statistics for nodes and edges. From the main menu, select '''Tools → Network Analyzer → Network Analysis → Analyze Network''', and click '''OK'''. Once the result is displayed, simply close the window. All statistics are stored as a regular table data. '''Step 3.''' Select the Style panel in the Control Panel. . {{attachment:StylesInterface.png}} '''Step 4. Create a new style.''' Click the '''Options''' {{attachment:OptionsDropDown.png}} drop-down, and select '''Create New Style'''. Enter a name for your new style when prompted. . {{attachment:NewStyle.png}} Since no mappings are set up yet, only default values are defined for some of the properties. From this panel, you can create node/edge mappings for all visual properties. '''Step 5. Change the default node color and shape.''' To set the default node shape to triangles, click the '''Default Value''' column for '''Node Shape'''. A list of available node shapes will be shown. Select the '''Round Rectangle''' icon and click the '''Apply''' button. You can edit other default values in the same way. In the example shown below, the node shape is set to '''Round Rectangle''', while the '''Node Fill Color''' is set to white. The new Style is automatically applied to the current network, as shown below. . {{attachment:Tutorial1-final.png}} === Tutorial 2: Creating a New Style with a Discrete Mapper === Now you have a network with new Style. The following section demonstrates how to create a new style using a discrete mapper. The goal is to draw protein-DNA interactions as dashed lines, and protein-protein interactions as solid lines. '''Step 1. Choose a property.''' In the Edge tab of the Style panel, find the '''Stroke Color (Unselected)''' property. '''Step 2. Choose a data attribute to map to.''' Expand the entry for '''Stroke Color (Unselected)''' by clicking the arrow icon to the right. Click the '''Column''' entry and select "interaction" from the drop-down list that appears. '''Step 3. Choose a mapping type.''' Under '''Mapping Type''', select '''Discrete Mapping'''. All available attribute values for "interaction" will be displayed, as shown below. . {{attachment:DiscreteMapper.png}} '''Step 4. Set the mapping relationship.''' Click the empty cell next to "pd" (protein-DNA interactions). On the right side of the cell, click on the '''...''' button that appears. A popup window will appear; select green or similar, and the change will immediately appear on the network window. . {{attachment:EdgeColorTut2.png}} Repeat step 4 for "pp" (protein-protein interactions), but select a darker color as edge stroke color. Then repeat steps 3 through 4 for the ''Edge Line Type'' property, by selecting the correct line style ("Dash" or "Solid") from the list. |
Line 352: | Line 335: |
{{attachment:NewVizMapperInteractionsRedBlue.png}} | {{attachment:Tutorial2-final.png}} |
Line 391: | Line 374: |
1. Apply ''Layout → yFiles Layouts → Organic''. The final view is shown below: | 1. Apply '''Layout → yFiles Layouts → Organic'''. The final view is shown below: |
Line 404: | Line 387: |
1. Load a network and run the Network Analyzer (''Tools → Network Analyzer → Network Analysis → Analyze Network''). This creates several new table columns (statistics for nodes and edges). 1. Click the ''!VizMapper'' tab in the ''Control Panel'', and select the ''Solid'' style. |
1. Load a network and run the Network Analyzer ('''Tools → Network Analyzer → Network Analysis → Analyze Network'''). This creates several new table columns (statistics for nodes and edges). 1. Click the ''!VizMapper'' panel in the ''Control Panel'', and select the ''Solid'' style. |
Line 429: | Line 412: |
* '''''Mapping Value Generators''''' - Functions in this menu category are value generators for discrete mappings. Users can set values for discrete mappings automatically by these functions. | * '''Mapping Value Generators''' - Functions in this menu category are value generators for discrete mappings. Users can set values for discrete mappings automatically by these functions. |
Line 455: | Line 438: |
||'''''Editor Type''''' ||'''''Supported Data Type''''' ||'''''Visual Attributes''''' || | ||'''Editor Type''' ||'''Supported Data Type''' ||'''Visual Attributes''' || |
Line 464: | Line 447: |
Each editor has a common section named '''''Range Setting'''''. | Each editor has a common section named '''Range Setting'''. |
Line 496: | Line 479: |
Visual styles are automatically saved with the session they were created in. Before Cytoscape exits, you will be prompted to make sure you save the session before quitting. It is also possible to save your visual styles in a file separate from the session file. To do this, navigate to the ''File → Export → Vizmap...'' menu option and save the properties as an XML file. This feature can be used to share visual styles with other users. |
Visual styles are automatically saved with the session they were created in. Before Cytoscape exits, you will be prompted to make sure you save the session before quitting. It is also possible to save your visual styles in a file separate from the session file. To do this, navigate to the ''File → Export → Vizmap...'' menu option and save the properties as a file. This feature can be used to share visual styles with other users. ==== Visual Style File Formats ==== The Cytoscape-native Style format is a XML. If you want to share Style files with other Cytoscape users, you need to export them to this XML format. From version 3.1.0, Cytoscape supports additional format for Cytoscape.js. This is a JSON file compatible with Cytoscape.js. |
Line 513: | Line 499: |
In some cases, you want to use the same value for multiple Visual Properties. For example, if you want to use the same value for ''Node Width'' and ''Node Height'', you have to use the '''''Visual Property Dependency''''' feature in !VizMapper. Currently, Cytoscape supports the following Visual Property Dependencies: | In some cases, you want to use the same value for multiple Visual Properties. For example, if you want to use the same value for ''Node Width'' and ''Node Height'', you have to use the '''Visual Property Dependency''' feature in !VizMapper. Currently, Cytoscape supports the following Visual Property Dependencies: |
What is Styles?
One of Cytoscape's strengths in network visualization is the ability to allow users to encode any table data (name, type, degree, weight, expression data, etc.) as a property (such as color, size of node, transparency, or font type) of the network. A set of these encoded or mapped table data sets is called a Style and can be created or edited in the Style panel of the Control Panel. In this interface, the appearance of your network is easily customized. For example, you can:
- Specify a default color and shape for all nodes.
- Set node sizes based on the degree of connectivity of the nodes. You can visually see the hub of a network...
- ...or, set the font size of the node labels instead.
- Visualize gene expression data along a color gradient.
- Encode specific physical entities as different node shapes.
- Use specific line types to indicate different types of interactions.
- Control edge transparency (opacity) using edge weights.
- Control multiple edge visual properties using edge score.
- Browse extremely-dense networks by controlling the opacity of nodes.
- Show highly-connected region by edge bundling and opacity.
- Add photo/image/graphics on top of nodes.
Cytoscape 3 has several sample styles. Below are a few examples of these applied to the galFiltered.sif network :
Introduction to the Style interface
The Style interface is located under the Style panel of the Control Panel.
This interface allows you to create/delete/view/switch between different styles using the Current Style options. The panel displays the mapping details for a given style and is used to edit these details as well.
At the top of the interface, there is a drop-down menu for selecting a pre-defined style. There is also an Options drop-down with with options to rename, remove, create and copy a Style, and an option to create a legend for the selected Style.
- The main area of the interface is composed of three tabs, for Node, Edge and Network.
Each tab contains a list of properties relevant to the current style. At the top of the list a Properties drop-down allows you to add additional properties to the list.
- Each property entry in the list has 4 columns:
The Default Value shows just that, the default value for the property. Clicking on the Default Value column for any property allows you to change the default value.
Mapping displays the type of mapping currently in use for the property. Clicking on the Mapping column for any property expands the property entry to show the interface for editing the mapping. Details on the mapping types provided here.
Bypass displays any style bypass for a selected node or edge. Note that a node/edge or subset of nodes/edges must be selected to activate the Bypass column. Clicking on the Bypass column for selected node(s)/edge(s) allows you to enter a bypass for that property for selected node(s)/edge(s).
The Default Value is used when no mapping is defined for a property, or for nodes/edges not covered by a mapping for a particular property. If a Mapping is defined for a property, this defines the style for all or a subset of nodes/edges, depending on how the mapping is defined. A Bypass on a specific set of nodes/edges will bypass and override both the default value and defined mapping.
Introduction to Style
The Cytoscape distribution includes several predefined styles to get you started. To examine a few styles, try out the following example:
Step 1. Load some sample data
Load a sample session file: From the main menu, select File → Open, and select the file sampleData/galFiltered.cys.
The session file includes a network, some annotations, and sample styles. By default, the Sample for galFiltered style is selected. Gene expression values for each node are colored along a color gradient between red and green (where red represents a low expression ratio and green represents a high expression ratio, using thresholds set for the gal4RGexp experiment bundled with Cytoscape in the sampleData/galExpData.csv file). Also, node size is mapped to the degree of the node (number of edges connected to the node) and you can see the hubs of the network as larger nodes. See the sample screenshot below:
Step 2. Switch between different styles
You can change the style by making a selection from the Current Style drop-down list, found at the top of the Style panel.
For example, if you select Sample1, a new visual style will be applied to your network, and you will see a white background and round blue nodes. If you zoom in closer, you can see that protein-DNA interactions (specified with the label "pd") are drawn with dashed edges, whereas protein-protein interactions (specified with the label "pp") are drawn with solid edges (see sample screenshot below).
Finally, if you select Solid, you can see the graphics below:
This style does not have mappings except node/edge labels, but you can modify the network graphics by editing the Default Value for any property.
Additional sample styles are available in the sampleStyles.xml file in the sampleData directory. You can import the sample file from File → Import → Visual Style File....
List of Node, Edge and Network Properties
Cytoscape allows a wide variety of properties to be controlled. These are summarized in the tables below.
Node Properties |
Description |
Shape |
The shape of the node. |
Fill Color |
The color of the node. |
Selection |
The color of the node when selected. |
Transparency |
The opacity of the color of the node. Zero means totally transparent, and 255 is most opaque. |
Border Paint |
The color of the border of the node. |
Border Transparency |
The opacity of the color of the border of the node. Allows for transparency. |
Border Line Type |
The type of line used for the border of the node. |
Border Width |
The width of the node border. |
Custom Graphics 1-9 |
A user-defined custom graphic that is displayed on the node. |
Custom Graphics Position 1-9 |
The position of each custom graphic. |
Label Font Face |
The font used for the node label. |
Label Font Size |
The size of the font used for the node label. |
Label |
The text used for the node label. |
Label Color |
The color of the node label. |
Label Transparency |
The transparency of the color of the node label. Allows for transparency. |
Label Position |
The position of the node label relative to the node. |
Label Width |
The maximum width of the node label. If the node label is wider than the specified width, Cytoscape will automatically wrap the label on space characters. Cytoscape will not hyphenate words, meaning that if a single word (i.e. no spaces) is longer than maximum width, the word will be displayed beyond the maximum width. |
Tooltip |
The text of the tooltip that appears when a mouse hovers over the node. |
Size |
The size of the node. Width and height will be equal. This visual property is mutually exclusive of Node Height and Node Width. |
Height |
The height of the node. Height will be independent of width. This visual property is mutually exclusive of Node Size. |
Width |
The width of the node. Width will be independent of height. This visual property is mutually exclusive of Node Size. |
X Location |
X location of the node. Default value of this will be ignored. The value will be used only when mapping function is defined. |
Y Location |
Y location of the node. Default value of this will be ignored. The value will be used only when mapping function is defined. |
Visible |
Node is visible or not. By default, this value is set to true. |
Nested Network Image Visible |
A boolean value that indicates whether a nested network should be visualized (assuming a nested network is present for the specified node). |
Edge Properties |
Description |
Stroke Color (Unselected) |
The color of the edge. |
Stroke Color (Selected) |
The color of the edge when selected. |
Transparency |
The opacity of the color of the edge. Allows for transparency. |
Line Type |
The type of stoke used to render the line (solid, dashed, etc.) |
Width |
The width of the line. |
Label |
The text used for the edge label. |
Label Color |
The color of the edge label. |
Label Transparency |
The opacity of the color of the edge label. Allows for transparency. |
Label Font Face |
The font used for the edge label. |
Label Font Size |
The size of the font used for the edge label. |
Tooltip |
The text of the tooltip that appears when a mouse hovers over the edge. |
Source Arrow Unselected Paint |
The color of the arrow on the source node end of the edge. |
Source Arrow Selected Paint |
The selected color of the arrow on the source node end of the edge. |
Source Arrow Shape |
The shape of the arrow on the source node end of the edge. |
Target Arrow Unselected Paint |
The color of the arrow on the target node end of the edge. |
Target Arrow Selected Paint |
The selected color of the arrow on the target node end of the edge. |
Target Arrow Shape |
The shape of the arrow on the target node end of the edge. |
Bend |
The edge bend. Defines how the edge is rendered. Users can add multiple handles to define how to bend the edge line. |
Curved |
If Egde Bend is defined, edges will be rendered as straight or curved lines. If this value is set to true, edges will be drawn as curved lines. |
Visible |
Edge is visible or not. By default, this value is set to true. |
Network Properties |
Description |
Background Paint |
The background color of the network view. |
Title |
The title of the network view. |
Height |
The height of the network view. |
Width |
The width of the network view. |
Scale Factor |
The zoom level of the network view. |
Center X Location |
The X location of network view center. |
Center Y Location |
The Y location of network view center. |
Edge Selection |
Edges are selectable or not. If this is false, users cannot select edges. |
Node Selection |
Nodes are selectable or not. If this is false, users cannot select nodes. |
Available Shapes and Line Styles
Available Shapes and Line Styles |
Sample |
Node Shapes |
|
Edge Line Types |
|
Arrow Shapes |
|
How Mappings Work
For each property, you can specify a default value or define a dynamic visual mapping. Cytoscape currently supports three different types of visual mappers:
Passthrough Mapper
- The values of network data attributes are passed directly through to properties. A passthrough mapper is typically used to specify node/edge labels. For example, a passthrough mapper can label all nodes with their common gene names.
Discrete Mapper
- Discrete data attributes are mapped to discrete properties. For example, a discrete mapper can map different types of molecules to different node shapes, such as rectangles for gene products and ellipses for metabolites.
Continuous Mapper
- Continuous data are mapped to properties. Depending on the property, there are three kinds of continuous mappers:
Continuous-to-Continuous Mapper: for example, you can map a continuous numerical value to node size.
Color Gradient Mapper: This is a special case of continuous-to-continuous mapping. Continuous numerical values are mapped to a color gradient.
Continuous-to-Discrete Mapper: for example, all values below 0 are mapped to square nodes, and all values above 0 are mapped to circular nodes.
- However, note that there is no way to smoothly morph between circular nodes and square nodes.
- Continuous data are mapped to properties. Depending on the property, there are three kinds of continuous mappers:
The table below shows mapper support for each property.
Legend
Symbol |
Description |
- |
Mapping is not supported for the specified visual property. |
+ |
Mapping is fully supported for the specified visual property. |
o |
Mapping is partially supported for the specified visual property. Support for “continuous to continuous” mapping is not supported. |
Node Mappings
Node Property |
Passthrough Mapper |
Discrete Mapper |
Continuous Mapper |
|
Color |
Node Color |
o |
+ |
+ |
Transparency |
o |
+ |
+ |
|
Border Paint |
o |
+ |
+ |
|
Border Transparency |
o |
+ |
+ |
|
Label Color |
o |
+ |
+ |
|
Label Transparency |
o |
+ |
+ |
|
Numeric |
Node Size/Width/Height |
o |
+ |
+ |
Font Size |
o |
+ |
+ |
|
Line Width |
o |
+ |
+ |
|
Label Width |
o |
+ |
+ |
|
Other |
Node Border Line Type |
o |
+ |
o |
Shape |
o |
+ |
o |
|
Label |
+ |
+ |
o |
|
Tooltip |
+ |
+ |
o |
|
Font Family |
o |
+ |
o |
|
Label Position |
o |
+ |
o |
|
Nested Network Image Visible |
o |
+ |
o |
Edge Mappings
Edge Properties |
Passthrough Mapper |
Discrete Mapper |
Continuous Mapper |
|
Color |
Edge Color |
o |
+ |
+ |
Transparency |
o |
+ |
+ |
|
Target Arrow Color |
o |
+ |
+ |
|
Source Arrow Color |
o |
+ |
+ |
|
Label Color |
o |
+ |
+ |
|
Label Transparency |
- |
+ |
+ |
|
Numeric |
Edge Line Width |
- |
+ |
+ |
Font Size |
- |
+ |
+ |
|
Label Width |
- |
+ |
+ |
|
Other |
Edge Line Type |
o |
+ |
o |
Source Arrow Shape |
o |
+ |
o |
|
Target Arrow Shape |
o |
+ |
o |
|
Label |
+ |
+ |
o |
|
Tooltip |
+ |
+ |
o |
|
Font Family |
- |
+ |
o |
Text Passthrough Mapper
In Cytoscape 2.8.0 and later versions, the Passthrough Mapper can recognize some text representations of values. This means, if you have an integer attribute named Node Size Values, you can directly map those values as the Node Size by setting Node Size Values as controlling attribute name for Node Size Passthrough mapping. The following value types are supported:
Color: Standard color names supported by all browsers or RGB representation in hex
- Numerical Values: Automatically mapped to the specified Visual Property.
- Custom Graphics: URL String. If the URL is valid and an actual image data exists there, Cytoscape automatically downloads the image and maps it to the node.
Examples
- Color Passthrough Mapping
- Node Size Passthrough Mapping
- Custom Graphics Passthrough Mapping
Custom Graphics
For Cytoscape 2.8.0 and later versions, Cytoscape supports Custom Graphics for nodes. Using the Style interface, you can map Custom Graphics to nodes like any other visual property. Cytoscape has a set of graphics and you can also add your own graphics in the Custom Graphics Manager, as well as remove or modify existing graphics.
Taxonomy Icon set used in this section is created by Database Center for Life Science (DBCLS) and is distributed under Creative Commons License (CC BY 2.1.)
Managing Images with the Custom Graphics Manager
The Custom Graphics Manager is available under View → Open Custom Graphics Manager:
- You can add images by drag-and-drop of image files and URLs. If you want to add images from a web browser or local file system, you can drag images from them and drop those images onto the list of images on the left.
If you want to add all images in a folder, press the + button on the bottom of the Custom Graphics Manager window.
Note: When you drag and drop images from web browser, make sure that you are actually dragging the URL for the image. In some cases, images are linked to an HTML page or scripts, and in such cases, this drag and drop feature may not work.
To remove images from the current session's Custom Graphics library, simply select graphics from the list and press the - button.
Images can be resized by defining specific Width and Height information. If the Aspect Ratio box is checked, the width-height ratio is always synchronized. You can resize the image to the original size by pressing Original button.
Using Custom Graphics in Visual Styles
Custom Graphics is used and defined like any other property, through the Style interface. There are nine Custom Graphics properties (Node Custom Paint 1 - 9). To select a custom graphic, first add the Custom Graphics property to the Properties list in the Style interface. Next, click the Default Value column of the Custom Graphics property to bring up the Custom Graphics Selector. Select a graphic and click Apply. To remove a graphic mapping, click the Remove Mapping icon ()from the Custom Graphics property in the properties list.
By default, custom graphics objects are automatically resized to be consistent with the Node Size Visual Property.
Custom Graphics Positions
Each custom graphics property is associated with a position. You can edit their positions by using the UI available in the Default Value column for any Custom Graphics Position property.
Z-Ordering
The number that appears with the custom graphics property represents an ordering of layers. Basic node color and shape are always rendered first, then node custom graphics 1, 2, ..., through 9.
Saving and Loading Custom Graphics
In general, saving and loading Custom Graphics is automatic. When you quit Cytoscape, all of the Custom Graphics in the manager will be saved automatically. There are two types of saving:
- To session file
When you save the current session to a file, the Custom Graphics used in Style will be saved to that file. For example, if you have a style with a discrete mapping for Custom Graphics, all custom graphics used in the style will be saved to the session file. Other graphics will not be saved in your session file. This is because your image library can be huge when you add thousands of images to the Custom Graphics Manager and it takes very long time to save and load the session file.
Automatic saving to CytoscapeConfiguration/images3 directory
When you select File → Quit, all of Custom Graphics in the Manager will be saved automatically to your Cytoscape setting directory. Usually, it's YOUR_HOME_DIRECTORY/CytoscapeConfiguration/images3.
In any case, Custom Graphics will be saved automatically to your system or session and will be restored when you restart Cytoscape or load a session.
Styles Tutorials
The following tutorials demonstrate some of the basic Style features. Each tutorial is independent of the others.
Tutorial 1: Create a Basic Style and Set Default Values
The goal of this tutorial is to learn how to create a new Style and set some default values.
Step 1. Load a sample network. From the main menu, select File → Import → Network → File..., and select sampleData/galFiltered.sif.
Step 2. Create some node/edge statistics by Network Analyzer. Network Analyzer calculates some basic statistics for nodes and edges. From the main menu, select Tools → Network Analyzer → Network Analysis → Analyze Network, and click OK. Once the result is displayed, simply close the window. All statistics are stored as a regular table data.
Step 3. Select the Style panel in the Control Panel.
Step 4. Create a new style. Click the Options drop-down, and select Create New Style. Enter a name for your new style when prompted.
Since no mappings are set up yet, only default values are defined for some of the properties. From this panel, you can create node/edge mappings for all visual properties.
Step 5. Change the default node color and shape. To set the default node shape to triangles, click the Default Value column for Node Shape. A list of available node shapes will be shown. Select the Round Rectangle icon and click the Apply button. You can edit other default values in the same way. In the example shown below, the node shape is set to Round Rectangle, while the Node Fill Color is set to white. The new Style is automatically applied to the current network, as shown below.
Tutorial 2: Creating a New Style with a Discrete Mapper
Now you have a network with new Style. The following section demonstrates how to create a new style using a discrete mapper. The goal is to draw protein-DNA interactions as dashed lines, and protein-protein interactions as solid lines.
Step 1. Choose a property. In the Edge tab of the Style panel, find the Stroke Color (Unselected) property.
Step 2. Choose a data attribute to map to. Expand the entry for Stroke Color (Unselected) by clicking the arrow icon to the right. Click the Column entry and select "interaction" from the drop-down list that appears.
Step 3. Choose a mapping type. Under Mapping Type, select Discrete Mapping. All available attribute values for "interaction" will be displayed, as shown below.
Step 4. Set the mapping relationship. Click the empty cell next to "pd" (protein-DNA interactions). On the right side of the cell, click on the ... button that appears. A popup window will appear; select green or similar, and the change will immediately appear on the network window.
Repeat step 4 for "pp" (protein-protein interactions), but select a darker color as edge stroke color. Then repeat steps 3 through 4 for the Edge Line Type property, by selecting the correct line style ("Dash" or "Solid") from the list.
Now your network should show "pd" interactions as dashed green lines and "pp" interactions as solid lines. A sample screenshot is provided below.
Tutorial 3: Creating a New Visual Style with a Continuous Mapper
At this point, you have a network with some edge visual mappings. Next, let's create mappings for nodes. The following section demonstrates how to create a new visual style using a continuous mapper. The goal is to superimpose node statistics (in this example, node degree) onto a network and display it along a color gradient.
Step 1. Choose a visual attribute. Double click the 'Node Fill Color' entry listed in Unused Properties. Node Fill Color will now appear at the top of the list, under the Node Visual Property category.
Step 2. Choose a node table column. Click on the cell to the right of the Node Fill Color entry and select "Degree" from the dropdown list that appears.
Step 3. Choose a mapping type. Set the "Continuous Mapping" option as the Mapping Type. This automatically creates a default mapping
Step 4. Define the points where colors will change. Double-click on the black-and-white gradient rectangle next to Graphical View to open the Color Gradient Mapper. Click and drag one to left, and move the second point to right.
Step 5. Define the colors between points. Double-click on the leftmost triangle (facing left) and a color palette will appear. Choose a shade of yellow and click OK. Double-click on the triangle at left and set the color white. For the triangle at the right, set its color to green.
The color gradients will immediately appear in the network window. All nodes with degree 1 will be set to white, and all values between 1 and 18 will be painted with a white/green color gradient. A sample screenshot is below.
Step 6. Repeat for other Visual Properties. You can create some more mappings for other numeric table data. For example, edge data table column "EdgeBetweenness" is a number, so you can use it for continuous mapping. The following is an example visualization by mapping Edge Width to "EdgeBetweenness".
Tutorial 4: How to Use Utilities for Discrete Mappers
The following tutorial demonstrates utilities for editing discrete mappings. The goal of this section is learning how to set and adjust values for discrete mappings automatically.
Switch the Visual Style to Minimal. Now your network looks like the following:
Cretate a Discrete Node Color Mapping. Select "AverageShortestPathLength" (generated by Network Analyzer) as controlling attribute.
Click the Node Fill Color cell, then right-click it to show the popup menu. Select Mapping Value Generators → Rainbow. It generates different colors for different table values as shown below:
Create a Discrete Node Label Font Size Mapping. Select "AverageShortestPathLength" as controlling attribute.
Click the Node Label Font Size cell, then right-click it to show the popup menu. Select Mapping Value Generators → Number Series. Type 3 for the first value and click OK. Enter 3 for increment.
Apply Layout → yFiles Layouts → Organic. The final view is shown below:
This mapping generator utility is useful for categorical data. The following example is created by adding node color discrete mapping from species column to color.
Tutorial 5: Using Custom Graphics in Visual Styles
This tutorial is a quick introduction to Custom Graphics feature. You can assign up to nine images per node as a part of Visual Style.
Prepare images. These can be any type of bitmap graphics. In this tutorial, we are going to use the Crystal Project's PNG icons. You can download it from here.
Start Cytoscape and select View → Open Custom Graphics Manager. Cytoscape 3 has some preset images and in this example, we use these presets. You can close the Custom Graphics Manager window for now.
Load a network and run the Network Analyzer (Tools → Network Analyzer → Network Analysis → Analyze Network). This creates several new table columns (statistics for nodes and edges).
Click the VizMapper panel in the Control Panel, and select the Solid style.
Click the Defaults section to open the Default Appearance Editor.
Click Node Custom Graphics 1 and select any of the custom graphics from the list. Click Node Transparency and set the value to zero.
Press Apply. Now your network looks like the following:
Open the Custom Graphics Manager again. Drag and Drop this
icon to the image list. It automatically adds it to the manager.
1. Create a Continuous Mapping for Node Custom Graphics 2. Select "BetweennessCentrality" as controlling column and move the handle to 0.2. Double click the region over 0.2 and set the new icon you have just added in the last step.
1. Press Apply and now open the Default Appearance Editor again. Click Node Custom Graphics Position 2 and move the position of the graphics to upper left.
1. Press Apply. Now the important nodes in the network (nodes with high betweenness centrality) is annotated with the icon.
Advanced Topics
Editing Discrete Mappings
Several utility functions are available for Discrete Mappings. You can use those functions by right clicking anywhere on the Visual Mapping Browser (shown below.)
Automatic Value Generators
Mapping Value Generators - Functions in this menu category are value generators for discrete mappings. Users can set values for discrete mappings automatically by these functions.
Rainbow and Rainbow OSC - These functions try to assign as diverse a set of colors as possible for each data value.
Random Numbers and Random Colors - Randomize numbers and colors. If you use this function for numerical values (node size, opacity, etc.) you need to specify a range. For example, if you want to set values from 1 to 100, you need to type 1-100 in the dialog.
Number Series - Set a series of numbers to the specified mapping.
Fit label width - This function is only for node width and height. When the node size is unlocked AND Node Width/Height discrete mappings are available, you can fit the size of each node to its label automatically by selecting this function. See the example below:
Edit Selected Values at Once
You can set multiple values at once. First, you need to select rows in which you want to change values then select Edit all selected rows... under Edit right-click menu. A dialog pops up and you can enter the new value for the selected rows.
Visual Property Dependencies
The fourth tab in the Default Editor is the list of available Visual Property Dependencies. A Visual Property Dependency can be established between different visual properties. Currently there are three dependencies: Lock Node with and height, Edge color to arrows, and Fit Custom Graphics to node.
Lock Node with and height - If this menu item is checked, Node Width and Node Height mappings are ignored and Node Size overrides them. If you want to use Fit node size to label function, you need to unlock this.
Edge color to arrows - If this menu item is checked then Edge Source Arrow Color and Edge Target Arrow Color are overridden and Edge Color is used in both cases.
Fit Custom Graphics to node - If a Custom Graphics is assigned to a node and this option is enabled, Custom Graphics will be resized to fit in the node.
Working with Continuous Mapping Editors
There are three kinds of Continuous Mapping Editors. Each of them are associated with a specific visual attributes:
Editor Type |
Supported Data Type |
Visual Attributes |
Color Gradient Editor |
Color |
node/edge/border/label colors |
Continuous-Continuous Editor |
Numbers |
size/width/opacity |
Continuous-Discrete Editor |
All others |
font/shape/text |
Range Setting Panel
Each editor has a common section named Range Setting.
Handle Value Box - This box displays the current value for the selected slider handle. Also you can directly type the value in this box to move the slider to an exact location.
Min/Max Button - Set the overall range of this editor. First time you open the editor, the Min and Max values are set by the range of attribute you selected, i.e., minimum and maximum value of the attribute will be set to the range of this editor. You can change this range anytime you want by pressing this button.
Add Handle Button - Add a new handle to the editor.
Delete Handle Button - Delete the selected handle from the slider widget.
Handle Value Editor Button - Edit value assigned to the selected handle.
Gradient Editor
The Gradient Editor is an editor for creating continuous mappings for colors. To change the color of each region, just double click the handles (small triangles on the top). A Color gradient will be created only when the editor has two or more handles (see the example below).
1 handle (no gradient) |
2 handles |
|
|
Continuous-Continuous Editor
The Continuous-Continuous Editor is for creating mappings between numerical attributes and numerical visual properties (size/opacity). To change the value assigned on Y-axis (the visual property shown in the example above is node size), drag the red squares or double click on the squares to directly type an exact value.
Continuous-Discrete Editor
The Continuous-Discrete Editor is used to create mappings from numerical attribute values to discrete visual properties, such as font, shape, or line style. To edit a value for a specific region, double click on the icon on the track.
Managing Visual Styles
All Cytoscape Visual Style settings are initially loaded from a default file that cannot be altered by users. When users make changes to the visual properties, a session_vizmap.xml file is saved in the session file. This means that if you save your session, you will not lose your visual properties. No other vizmap files are saved during normal operation.
Saving Visual Styles
Visual styles are automatically saved with the session they were created in. Before Cytoscape exits, you will be prompted to make sure you save the session before quitting. It is also possible to save your visual styles in a file separate from the session file. To do this, navigate to the File → Export → Vizmap... menu option and save the properties as a file. This feature can be used to share visual styles with other users.
Visual Style File Formats
The Cytoscape-native Style format is a XML. If you want to share Style files with other Cytoscape users, you need to export them to this XML format. From version 3.1.0, Cytoscape supports additional format for Cytoscape.js. This is a JSON file compatible with Cytoscape.js.
Importing Visual Styles
To import existing visual styles, navigate to the File → Import → Vizmap File... menu option and select a vizmap.props (Cytoscape 2 format) or vizmap.xml (Cytoscape 3 format) file. Imported properties will supplement existing properties or override existing properties if the properties have the same name. You can also specify a visual properties file using the -V command line option (cytoscape.sh -V myVizmap.props). Visual properties loaded from the command line will override any default properties.
Bypassing Visual Styles
Cytoscape has a feature that allows users to override visualizations created by the VizMapper for individual nodes and edges. This feature is available by right-clicking on a node or edge and then clicking on Edit → Bypass Visual Style.
Each visual property of the node or edge is displayed. When a property is overridden, a lock icon appears next to the property and Clear / Edit Bypass menu options appear. By clicking the Clear option, the bypass will be removed and the attribute will be displayed as defined by the VizMapper. At the bottom of the menu a Reset All option appears. When clicked, this will remove all bypasses for the specified node or edge. In the example above, you can see the selected node size, color, and shape have been overridden. This is apparent in the appearance of the node itself and by the check marks in the popup menu.
It is important to realize that the Visual Mapping Bypass only works for individual nodes and edges and not for all nodes or edges of a specific type. Using the bypass function is not particularly resource intensive, you can use it as much as you like. However, if you find yourself repeating the same bypasses, then you should consider using the VizMapper instead.
The bypass values will persist between sessions only as long as you save your session. If you don't save your session, you will lose whatever bypass values you set.
Visual Property Dependencies
In some cases, you want to use the same value for multiple Visual Properties. For example, if you want to use the same value for Node Width and Node Height, you have to use the Visual Property Dependency feature in VizMapper. Currently, Cytoscape supports the following Visual Property Dependencies:
Edge color to arrows - Assign same color for edge and arrows.
Fit Custom Graphics to node - Adjust the size of Custom Graphics based on Node Size.
Lock node width and height - Assign the same value to node width and height.
Example: Unlocked
Example: Locked