14648
Comment:
|
39800
|
Deletions are marked like this. | Additions are marked like this. |
Line 1: | Line 1: |
= Do you want to share your own code snippet? = Let us know! Send a message to [[https://groups.google.com/forum/?fromgroups#!forum/cytoscape-discuss|Cytoscape Discuss]] to have your snippet included in this cookbook. |
|
Line 2: | Line 6: |
= About the cookbook = To help app developers to develop their own app, the Cytoscape developer team developed the cookbook, a collection of small apps. The cookbook could be used to 1. get your feet wet 1. find a template project to extend 1. find out how to do something in Cytoscape. = How to use the cookbook? = SVN repository: http://chianti.ucsd.edu/svn/core3/support/trunk/samples/ Steps: 1. Check out sample project from SVN repository with the above URL 1. Compile with “mvn clean install” 1. Copy the jar in the project target directory to Cytoscape installation: bundles/apps 1. Start Cytoscape 3.0 = The list of app examples in the cookbook = The list of sample apps is basically the same as in [[http://cytoscape.wodaklab.org/wiki/plugin_developer_tutorial|the cookbook for Cytoscape 2.X]]. They are mostly Cytoscape Bundle apps, but also include a few Simple apps. Some of them are, == Introduction == This tutorial will show some code snippets about how to use Cytoscape APIs on plugin development. Each feature is included in a sample plugin, which can serve as a starting point or template for new plugin developers. The code snippets can also be used as reference for experienced developers. Cytoscape plugin is usually packaged in a jar file and deployed to the plugins directory of Cytoscape. When Cytoscape starts up and initializes, its plugin manager will look up all the plugins in plugins directory. A plugin should have following three components. A class, which extends CytoscapePlugin. This is the entry point to Cytoscape. A manifest file, explicitly list the class, which extended CytoscapePlugin class A plugin.props file, which list the information about the plugin, such as plugin name, author, release date and more. Although this file is not absolutely required, it is recommended to have one, since plugin manager will need the information to handle the plugin properly. See the page at http://www.cytoscape.org/cgi-bin/moin.cgi/Cytoscape_Plugin_Tutorial for detail about the definition of a plugin.props. If plugin developer will share and publish their plugins, they are encouraged to submit their plugins to Cytoscape plugin website at http://cytoscape.org/plugins/index.php . |
= Swing Application = |
Line 40: | Line 10: |
It takes three steps to add a tabbed panel to the control panel. {{{ #!java //1. Define a CytoPanel class |
In Cytoscape desktop, there are three CytoPanels, Control panel, data panel and result panel, located at West, south and east, respectively. New tabbed panel can be easily added to the CytoPanel. All the app developer should do is (1) defines a JPanel, which implements the CytoPanelComponnet; (2) register the new panel as OSGi service. The internal CytoPanel manager will automatically pick up the newly registered service identified as CytoPanelComponent and adds the new panel to the specified target CytoPanel. '''Step 1''' {{{ #!java // Define a CytoPanel class |
Line 53: | Line 26: |
// 2. Create an instance of MyCytoPanel |
}}} '''Step 2''' {{{ #!java // In the start method of your CyActivator class: // Create an instance: |
Line 56: | Line 34: |
//3. Register myPanel as a service registerService(bc,myCytoPanel,CytoPanelComponent.class, new Properties()); }}} Download a sample plugin, here. |
// Register it as a service: registerService(bc,myCytoPanel,CytoPanelComponent.class, new Properties()); }}} Look at a sample App, [[https://github.com/cytoscape/cytoscape-samples/tree/develop/AddCytoPanel|Here]]. |
Line 65: | Line 42: |
Sometimes, an app needs to add an menu item to the cytoscape menu or add an image icon on the Cytoscape toolbar. In such case, app developer needs to (1) define a class, which implements CyAction or extends AbstractCyAction; (2) and register the class as an OSGi service. The internal CyAction manger of Cytoscape will pick up the registered service and create the menu item as defined. Note the methods isInToolbar() and isInMenu(), its return value true or false will determine if menu item or image icon will be created or not. '''Step 1''' |
|
Line 86: | Line 65: |
{{{ #!java // Register the CyAction as service |
'''Step 2''' {{{ #!java // In the start method of your CyActivator class: // Create an instance: |
Line 90: | Line 71: |
// Register it as a service: | |
Line 93: | Line 75: |
Look at a sample App, [[https://github.com/cytoscape/cytoscape-samples/tree/develop/AddImageIconOnToolBar|Here]]. |
|
Line 95: | Line 80: |
The way to define a submenu item is similar to define a menu item. Besides the definition of menu item itself, it is also necessary to define its parent menu item, see below. '''Step 1''' |
|
Line 98: | Line 86: |
public class Sample04 extends AbstractCyAction { | public class MySubMenuItemAction extends AbstractCyAction { |
Line 100: | Line 88: |
public Sample04(CySwingApplication desktopApp){ // Add a sub-menu item -- Apps->Sample04->sample04 super("sample04..."); setPreferredMenu("Apps.Sample04"); //Specify the menuGravity value to put the menuItem in the desired place setMenuGravity(2.0f); |
public MySubMenuItemAction(CySwingApplication desktopApp){ super("My Sub MenuItem..."); setPreferredMenu("Apps.My MenuItem"); //setMenuGravity(2.0f); |
Line 110: | Line 96: |
{{{ #!java // Register the CyAction as service Sample04 Sample04Action = new Sample04(cytoscapeDesktopService); registerService(bc,Sample04Action,CyAction.class, new Properties()); }}} |
'''Step 2''' {{{ #!java // In the start method of your CyActivator class: // Create an instance: MySubMenuItemAction action = new MySubMenuItemAction(cytoscapeDesktopService); // Register it as a service: registerService(bc,action,CyAction.class, new Properties()); }}} Look at a sample App, [[https://github.com/cytoscape/cytoscape-samples/tree/develop/AddSubMenuItem|here]]. = Model = |
Line 119: | Line 112: |
Cytoscape provides a service 'CyNetworkFactory' for network creation. To create a new network, all we should do is to get a reference to the service and use this service to create new network. With the new network, new nodes and edges can be created with the API of CyNetwork. | To create a network, get a reference to the `CyNetworkFactory` service, and tell it to create a network. With the new network, nodes and edges can be created through the `CyNetwork` interface. |
Line 123: | Line 116: |
CyNetworkFactory cyNetworkFactoryServiceRef = getService(bc,CyNetworkFactory.class); |
CyNetworkFactory networkFactory = getService(bc, CyNetworkFactory.class); |
Line 127: | Line 119: |
// To create a new network CyNetwork myNet = cnf.createNetwork(); |
// Create a new network CyNetwork myNet = networkFactory.createNetwork(); // Set name for network myNet.getRow(net).set(CyNetwork.NAME, "My network"); |
Line 136: | Line 130: |
// set name for new nodes myNet.getDefaultNodeTable().getRow(node1.getSUID()).set("name", "Node1"); myNet.getDefaultNodeTable().getRow(node2.getSUID()).set("name", "Node2"); |
// Set name for new nodes myNet.getRow(node1).set(CyNetwork.NAME, "Node1"); myNet.getRow(node2).set(CyNetwork.NAME, "Node2"); |
Line 143: | Line 137: |
}}} To destroy, we need a reference to Network manager {{{ #!java // To get a reference of CyNetworkManager at CyActivator class of the App |
// Add the network to Cytoscape CyNetworkManager networkManager = getService(bc, CyNetworkManager.class); networkManager.addNetwork(myNet); }}} Destroying networks is done through the `CyNetworkManager` service. First, in the `start` method of your `CyActivator` class: {{{ #!java // Get a CyNetworkManager |
Line 150: | Line 149: |
// To destroy a network with NetworkManager |
}}} Now you can use `CyNetworkManager` in your code: {{{ #!java // Destroy a network with NetworkManager |
Line 155: | Line 158: |
== How to create, modify, and destroy a network view? == Cytoscape provides a service 'CyNetworkViewFactory' for network view creation. To create a new network view, all we should do is to get a reference to the service and use this service to create new network view. {{{ #!java // To get a reference of CyNetworkViewFactory at CyActivator class of the App CyNetworkViewFactory cyNetworkViewFactoryServiceRef = getService(bc,CyNetworkViewFactory.class); ... // To create a new networkView for myNet CyNetworkView myView = cnvf.createNetworkView(myNet); ... }}} To destroy a network view, we need a reference of NetworkViewManager, a service provided by Cytoscape. {{{ #!java // get a reference of CyNetworkViewManager at CyActivator class CyNetworkViewManager cyNetworkViewManagerServiceRef = getService(bc,CyNetworkViewManager.class); ... // To destroy a network view through NetworkViewManager networkViewManager.destroyNetworkView(myView); }}} |
Look at a sample App, [[https://github.com/cytoscape/cytoscape-samples/tree/develop/CreateDestroyNetwork|here]]. |
Line 189: | Line 162: |
We can use the class CyTableUtil to get the list of selected nodes in a network |
The selection state of a node or edge is saved in the table associated with the network. Its attribute or column name is “selected”. Therefore, to determine the selection state of a node, we need to get the CyRow of the node and check the value of column “selected”. There is a util class `CyTableUtil`. We can use this class to get the list of selected nodes in a network |
Line 196: | Line 172: |
== How to handle events from a network (and discuss each event type)? == To handle Cytoscape events, a class must implements Cytosape listener and register the listener. {{{ #!java // Define a class, which implements a listener public class MyListenerClass implements NetworkAddedListener { .... public void handleEvent(NetworkAddedEvent e){ // do something here } } // Register the listener in the CyActivator class registerService(bc,myListenerClass, NetworkAddedListener.class, new Properties()); }}} Alternatively, listener class may be registered through the CyEventHelper service provided by Cytoscape. {{{ #!java // get the reference to the CyEventHelper service // register the my listener }}} == How to change the background color of a view? == Network background color is one of the visual property of the visual style. {{{ #!java // Set the background of current view to RED view.setVisualProperty(BasicVisualLexicon.NETWORK_BACKGROUND_PAINT, Color.red); view.updateView(); }}} == How to zoom a network view? == {{{ #!java // Define a task public class ZoomTask extends AbstractNetworkViewTask { ... ZoomTask(CyNetworkView v) { super(v); ... } public void run(TaskMonitor tm) { ... // Get the scale and adjust it double newScale = view.getVisualProperty(NETWORK_SCALE_FACTOR).doubleValue() * scale; view.setVisualProperty(NETWORK_SCALE_FACTOR, newScale); view.updateView(); } } ... } }}} {{{ #!java // Define taskFactory and pass in the view as parameter to the task public class Sample10TaskFactory extends AbstractNetworkViewTaskFactory { .... public TaskIterator createTaskIterator() { ... return new TaskIterator(new ZoomTask(this.view)); .... } } }}} {{{ #!java // Register the task factory as service registerService(bc,sample10TaskFactory,TaskFactory.class, sample10TaskFactoryProps); |
Look at a sample App, [[https://github.com/cytoscape/cytoscape-samples/tree/develop/GetSelectedNodes|Here]]. == How to set the name of a network? == The network name is kept in the table associated with the network, and its column name is “name”. To set the network name, first we need to get the CyRow of the network object, then set the “name” attribute of this row. {{{ #!java CyNetwork net = ...; String name = ...; net.getRow(net).set(CyNetwork.NAME, name); }}} Look at a sample App, [[https://github.com/cytoscape/cytoscape-samples/tree/develop/CreateDestroyNetwork|here]]. == How to get the name of a network? == The network title is kept in the table associated with the network, and its column name is “name”. To set the network name/title, first we need to get the CyRow of the network object, then get the “name” attribute of this row. {{{ #!java CyNetwork net = ...; String name = net.getRow(net).get(CyNetwork.NAME, String.class); }}} == How to set the name of a node? == The name of a node is kept in the CyRow of the table associated with the network, and its column name is “name”. To set the node name, first we need to get the CyRow of the node object, then set the “name” attribute of this row. {{{ #!java CyNode node = ...; String myNodeName = ...; net.getRow(node).set(CyNetwork.NAME, myNodeName); }}} Look at a sample App, [[https://github.com/cytoscape/cytoscape-samples/tree/develop/CreateDestroyNetwork|here]]. == How to get the name of a node? == The name of a node is kept in the CyRow of the table associated with the network, and its column name is “name”. To get the node name, first we need to get the CyRow of the node object, then get the “name” attribute of this row. {{{ #!java CyNode node = ...; String myNodeName = net.getRow(node).get(CyNetwork.NAME, String.class); |
Line 279: | Line 222: |
There are two step to load attribute to a table. (1) Create a global table and populate it. (2) Map the global table to specific table based on a key attribute, i.e. create virtual column for the table. | |
Line 292: | Line 234: |
String attributeNmae = "MyAttributeName"; table.createColumn(attributeNmae, Integer.class, false); |
String attributeName = "MyAttributeName"; table.createColumn(attributeName, Integer.class, false); |
Line 298: | Line 240: |
row.set(attributeNmae, new Integer(2)); | row.set(attributeName, new Integer(2)); |
Line 301: | Line 243: |
row.set(attributeNmae, new Integer(3)); | row.set(attributeName, new Integer(3)); |
Line 304: | Line 246: |
row.set(attributeNmae, new Integer(4)); | row.set(attributeName, new Integer(4)); |
Line 314: | Line 256: |
}}} |
}}} |
Line 322: | Line 259: |
1. get the CyTable through the network | '''Step 1''': get the CyTable through the network |
Line 329: | Line 266: |
2. Find the column and delete it | '''Step 2''': Find the column and delete it |
Line 337: | Line 274: |
== How to get all the nodes with a specific attribute value? == Copy this method in your code: {{{ #!java /** * Get all the nodes with a given attribute value. * * This method is effectively a wrapper around {@link CyTable#getMatchingRows}. * It converts the table's primary keys (assuming they are node SUIDs) back to * nodes in the network. * * Here is an example of using this method to find all nodes with a given name: * * {@code * CyNetwork net = ...; * String nodeNameToSearchFor = ...; * Set<CyNode> nodes = getNodesWithValue(net, net.getDefaultNodeTable(), "name", nodeNameToSearchFor); * // nodes now contains all CyNodes with the name specified by nodeNameToSearchFor * } * @param net The network that contains the nodes you are looking for. * @param table The node table that has the attribute value you are looking for; * the primary keys of this table <i>must</i> be SUIDs of nodes in {@code net}. * @param colname The name of the column with the attribute value * @param value The attribute value * @return A set of {@code CyNode}s with a matching value, or an empty set if no nodes match. */ private static Set<CyNode> getNodesWithValue( final CyNetwork net, final CyTable table, final String colname, final Object value) { final Collection<CyRow> matchingRows = table.getMatchingRows(colname, value); final Set<CyNode> nodes = new HashSet<CyNode>(); final String primaryKeyColname = table.getPrimaryKey().getName(); for (final CyRow row : matchingRows) { final Long nodeId = row.get(primaryKeyColname, Long.class); if (nodeId == null) continue; final CyNode node = net.getNode(nodeId); if (node == null) continue; nodes.add(node); } return nodes; } }}} == How to use model objects (CyNetwork, CyNode, etc.) when writing tests? == '''Step 1'''. Include the JUnit framework as a dependency in your {{{pom.xml}}}: {{{#!xml <dependency> <groupId>junit</groupId> <artifactId>junit</artifactId> <scope>test</scope> </dependency> }}} ''Step 2''. Include the {{{model-impl}}} package as a dependency in your {{{pom.xml}}}: {{{#!xml <dependency> <groupId>org.cytoscape</groupId> <artifactId>model-impl</artifactId> <version>${cytoscape.api.version}</version> <scope>test</scope> </dependency> }}} ''Step 3''. In your testing code, use {{{NetworkTestSupport}}} to get a {{{CyNetwork}}} instance: {{{#!java import org.cytoscape.model.NetworkTestSupport; ... final NetworkTestSupport nts = new NetworkTestSupport(); final CyNetwork network = nts.getNetwork(); // Now you have a CyNetwork! }}} = View Model = == Getting node views for newly created nodes? == After creating a node and edge, this is how to get its view: {{{ #!java CyNetworkView networkView = ...; CyNetwork network = networkView.getModel(); CyEventHelper eventHelper = ...; CyNode newNode = network.addNode(); network.getRow(newNode).set(CyNetwork.NAME, "New Node"); eventHelper.flushPayloadEvents(); View<CyNode> newNodeView = networkView.getNodeView(newNode); }}} After creating the node in {{{CyNetwork}}}, you have to call {{{CyEventHelper}}}'s {{{flushPayloadEvents}}} so that the new node gets a node view. If {{{flushPayloadEvents}}} is not called, {{{getNodeView}}} may return null. If you are creating a bunch of nodes at once, call {{{flushPayloadEvents}}} after you have finished creating all the nodes, ''not'' after each node is created. Example: {{{ #!java CyNetworkView networkView = ...; CyNetwork network = networkView.getModel(); CyEventHelper eventHelper = ...; for (int i = 1; i <= 100; i++) { CyNode node = network.addNode(); network.getRow(newNode).set(CyNetwork.NAME, "Node " + i); } eventHelper.flushPayloadEvents(); }}} == How to create, modify, and destroy a network view? == To create a network, get a reference to the `CyNetworkViewFactory` service, and tell it to create a network view. First, in the `start` method of your `CyActivator` class: {{{ #!java // Get a CyNetworkViewFactory CyNetworkViewFactory networkViewFactory = getService(bc, CyNetworkViewFactory.class); }}} Now you can use `CyNetworkViewFactory` in your code: {{{ #!java // Create a new network view CyNetworkView myView = networkViewFactory.createNetworkView(myNet); // Add view to Cytoscape CyNetworkViewManager networkViewManager = getService(bc, CyNetworkViewManager.class); networkViewManager.addNetworkView(myView); }}} Destroying network views is done through the `CyNetworkViewManager` service. First, in the `start` method of your `CyActivator` class: {{{ #!java // get a CyNetworkViewManager CyNetworkViewManager networkViewManager = getService(bc, CyNetworkViewManager.class); }}} Now you can use `CyNetworkViewManager` in your code: {{{ #!java // destroy a network view through NetworkViewManager networkViewManager.destroyNetworkView(myView); }}} == How to change the background color of a view? == Network background color is changed as a _visual property_. {{{ #!java // Set the background of current view to RED view.setVisualProperty(BasicVisualLexicon.NETWORK_BACKGROUND_PAINT, Color.red); view.updateView(); }}} == How to zoom a network view? == {{{ #!java // Get the scale and adjust double newScale = view.getVisualProperty(NETWORK_SCALE_FACTOR).doubleValue() * scale; view.setVisualProperty(NETWORK_SCALE_FACTOR, newScale); ... view.updateView(); }}} == How to get and set node coordinate positions? == Given a {{{View<CyNode>}}}, here's how to get its x and y coordinate positions: {{{ #!java View<CyNode> nodeView = ...; Double x = nodeView.getVisualProperty(BasicVisualLexicon.NODE_X_LOCATION); Double y = nodeView.getVisualProperty(BasicVisualLexicon.NODE_Y_LOCATION);}}} Here's how to set the x and y coordinate positions: {{{ #!java View<CyNode> nodeView = ...; double x = ...; double y = ...; nodeView.setVisualProperty(BasicVisualLexicon.NODE_X_LOCATION, x); nodeView.setVisualProperty(BasicVisualLexicon.NODE_Y_LOCATION, y);}}} == How to write a layout algorithm? == First define a layout class, which implements CyLayoutAlgorithm interface or extends AbstractLayoutAlgorithm class. Then register the layout class as a service. {{{ #!java // Define a layout class public class MyLayout extends AbstractLayoutAlgorithm { ... } // Define a layout task class public class MyLayoutTask extends AbstractLayoutTask { ... //Perform actual layout task final protected void doLayout(final TaskMonitor taskMonitor) { ... } ... } // Register the layout class as a service in CyActivator class Properties myLayoutProps = new Properties(); myLayoutProps.setProperty("preferredMenu","My Layouts"); registerService(bc,myLayout,CyLayoutAlgorithm.class, myLayoutProps); }}} == How to add components to the node view, edge view, and attribute browser context menus? == To add a context menu to a NodeView, define a class, which extends AbstractNodeViewTaskFactory, and register the NodeViewTaskFactory as service. We can add the title of menu item by setting the service property when we register the nodeViewTaskFactory. To add context menu to the table browser, define a class, which extends AbstractTableCellTaskFactory. Create an instance and register it as service (Note register as TableCellTaskFactory). {{{ #!java // Define a class MyNodeViewTaskFactory public class MyNodeViewTaskFactory extends AbstractNodeViewTaskFactory { ... } // Register myNodeViewTaskFactory as a service in CyActivator Properties myNodeViewTaskFactoryProps = new Properties(); myNodeViewTaskFactoryProps.setProperty("title","My context menu title"); registerService(bc,myNodeViewTaskFactory,NodeViewTaskFactory.class, myNodeViewTaskFactoryProps); }}} = VizMapper = == How to use the VizMapper programmatically? == Cytosape provides services for using visual mapping programming. There services are VisualMappingManager, VisualStyleFactory and VisualMappingFunctionFactory. App should get references to these services in CyActivator class, the entry point of the app. We can create new visualStyle with VisualStyleFactory and create mapping function with VisualMappingFunctionFactory very easily. After a new visual style is created, it should register with the VisualMappingManger, in this way the new visual style will be available throughout Cytoscape. {{{ #!java // To get references to services in CyActivator class VisualMappingManager vmmServiceRef = getService(bc,VisualMappingManager.class); VisualStyleFactory visualStyleFactoryServiceRef = getService(bc,VisualStyleFactory.class); VisualMappingFunctionFactory vmfFactoryC = getService(bc,VisualMappingFunctionFactory.class, "(mapping.type=continuous)"); VisualMappingFunctionFactory vmfFactoryD = getService(bc,VisualMappingFunctionFactory.class, "(mapping.type=discrete)"); VisualMappingFunctionFactory vmfFactoryP = getService(bc,VisualMappingFunctionFactory.class, "(mapping.type=passthrough)"); // To create a new VisualStyle object and set the mapping function VisualStyle vs= this.visualStyleFactoryServiceRef.createVisualStyle("My visual style"); //Use pass-through mapping String ctrAttrName1 = "SUID"; PassthroughMapping pMapping = (PassthroughMapping) vmfFactoryP.createVisualMappingFunction(ctrAttrName1, String.class, attrForTest, BasicVisualLexicon.NODE_LABEL); vs.addVisualMappingFunction(pMapping); // Add the new style to the VisualMappingManager vmmServiceRef.addVisualStyle(vs); // Apply the visual style to a NetwokView vs.apply(myNetworkView); myNetworkView.updateView(); }}} == How to apply a continuous color gradient to nodes according to their degree? == {{{ #!java // Set node color map to attribute "Degree" ContinuousMapping mapping = (ContinuousMapping) this.continuousMappingFactoryServiceRef.createVisualMappingFunction("Degree", Integer.class, BasicVisualLexicon.NODE_FILL_COLOR); // Define the points Double val1 = 2d; BoundaryRangeValues<Paint> brv1 = new BoundaryRangeValues<Paint>(Color.RED, Color.GREEN, Color.PINK); Double val2 = 12d; BoundaryRangeValues<Paint> brv2 = new BoundaryRangeValues<Paint>(Color.WHITE, Color.YELLOW, Color.BLACK); // Set the points mapping.addPoint(val1, brv1); mapping.addPoint(val2, brv2); // add the mapping to visual style vs.addVisualMappingFunction(mapping); }}} == How to load a visual properties file? == Cytoscape provide a service 'LoadVizmapFileTaskFactory' for loading visual styles definded in a property file. {{{ #!java // get a reference to Cytoscape service -- LoadVizmapFileTaskFactory LoadVizmapFileTaskFactory loadVizmapFileTaskFactory = getService(bc,LoadVizmapFileTaskFactory.class); }}} {{{ #!java // Use the service to load visual style, 'f' is the File object to hold the visual properties Set<VisualStyle> vsSet = loadVizmapFileTaskFactory.loadStyles(f); }}} = I/O = == How to build a network reader to support my own format? == First, we should define the format of my network file and its file extension. Let's say, each line in our network file has two columns, tab-delimited. And we define file extension '.tc', stands for 'two columns'. {{{ #!java //1. define a file filter (BasicCyFileFilter), to support the reader to read the file with extension '.tc' HashSet<String> extensions = new HashSet<String>(); extensions.add("tc"); HashSet<String> contentTypes = new HashSet<String>(); contentTypes.add("txt"); String description = "My test filter"; DataCategory category = DataCategory.NETWORK; BasicCyFileFilter filter = new BasicCyFileFilter(extensions,contentTypes, description, category, swingAdapter.getStreamUtil()); //2. Create an instance of the ReaderFactory // Note that extends TCReaderFactory must implement the interface InputStreamTaskFactory or extends the class AbstractInputStreamTaskFactory. // And the defined task must implement CyNetworkReader TCReaderFactory factory = new TCReaderFactory(filter, swingAdapter.getCyNetworkFactory(), swingAdapter.getCyNetworkViewFactory()); //3. register the ReaderFactory as an InputStreamTaskFactory. Properties props = new Properties(); props.setProperty("readerDescription","TC file reader"); props.setProperty("readerId","tcNetworkReader"); swingAdapter.getCyServiceRegistrar().registerService(factory, InputStreamTaskFactory.class, props); }}} Compile [http://chianti.ucsd.edu/svn/core3/samples/trunk/sample27a|this sample code], and install the app in Cytoscape. When we try to import a network from a file (File-->Import-->Network-->File..), we will find file type '.tc' is listed as one of the file types supported by Cytoscape. = Work = == How to use the Cytoscape task monitor to show the progress of my job? == Get a Cytoscape service DialogTaskManager and execute the task through the taskManager. {{{ #!java // Get a Cytoscape service 'DialogTaskManager' in CyActivator class DialogTaskManager dialogTaskManager = getService(bc, DialogTaskManager.class); // Define a task and set the progress in the run() method public class MyTask extends AbstractTask { ... public void run(final TaskMonitor taskMonitor) { // Give the task a title. taskMonitor.setTitle("My task"); ... taskMonitor.setProgress(0.1); // do something here ... taskMonitor.setProgress(1.0); } // Execute the task through the TaskManager DialogTaskManager.execute(myTaskFactory); }}} == How to issue non-blocking, informational messages to users? == Cytoscape 3.0 has a status bar at the bottom of the Cytoscape desktop window. Tasks can put messages into the status bar. These messages wouldn't require immediate user attention but are informational. Debug messages useful for developers do not belong in the status bar. To issue user messages to the status bar: '''Step 1'''. Include the SLF4J library as a dependency in your {{{pom.xml}}} file. {{{ #!xml <dependency> <groupId>org.slf4j</groupId> <artifactId>slf4j-api</artifactId> <version>1.6.6</version> </dependency> <dependency> <groupId>org.slf4j</groupId> <artifactId>slf4j-simple</artifactId> </dependency> }}} '''Step 2'''. Obtain an instance of the {{{CyUserMessages}}} log. {{{ #!java import org.slf4j.LoggerFactory; import org.slf4j.Logger; ... Logger userMessagesLogger = LoggerFactory.getLogger("CyUserMessages"); }}} '''Step 3'''. Issue log messages to the {{{CyUserMessages}}} log. {{{ #!java int lineError = 12; userMessagesLogger.warn("Parse error on line {}", lineError); }}} The message will appear in the status bar. = Session = == How to save/restore app states? == There are two events, which are important for saving/restoring App state. The two evetns are SessionAboutToBeSavedEvent and SessionLoadedEvent. App should implement the two listeners and register them. {{{ #!java // Implements the session event listeners public class MyClass implements SessionAboutToBeSavedListener, SessionLoadedListener { // Save app state in a file public void handleEvent(SessionAboutToBeSavedEvent e){ // save app state file "myAppStateFile" ... } // restore app state from a file public void handleEvent(SessionLoadedEvent e){ if (e.getLoadedSession().getAppFileListMap() == null || e.getLoadedSession().getAppFileListMap().size() ==0){ return; } List<File> files = e.getLoadedSession().getAppFileListMap().get("myAppStateFile"); ... } } // Register the two listeners in the CyActivator class registerService(bc,myClass,SessionAboutToBeSavedListener.class, new Properties()); registerService(bc,myClass,SessionLoadedListener.class, new Properties()); }}} == How to add CyProperty to save values across sessions? == CyProperty acts as a container to save properties of the type (key, value) across sessions. They are available for the user to manually change in the preference menu option. {{{ #!java //1. Adding a property which saves the node border width selected by the user. public static String NodeBorderWidthInPaths = "NODE_BORDER_WIDTH_IN_PATHS"; public static Double NodeBorderWidthInPathsValue = 20.0; public static Properties nodeBorderWidthProps = new Properties(); //2. Find if the CyProperty already exists, if not create one with default value. CyProperty<Properties> nodeBorderWidthProperty = null; CySessionManager mySessionManager; mySessionManager = adapter.getCySessionManager(); CySession session; session = mySessionManager.getCurrentSession(); if(session.equals(null)) System.out.println("session null"); //3. Get all properties and loop through to find your own. Set<CyProperty<?>> props = new HashSet<CyProperty<?>>(); props = session.getProperties(); if(props.equals(null)) System.out.println("props null"); boolean flag = false; for (CyProperty<?> prop : props) { if (prop.getName() != null){ if (prop.getName().equals(NodeBorderWidthInPaths)) { nodeBorderWidthProperty = (CyProperty<Properties>) prop; flag = true; break; } } } //4. If the property does not exists, create nodeBorderWidthProperty if (!flag) { nodeBorderWidthProps.setProperty(NodeBorderWidthInPaths, NodeBorderWidthInPathsValue.toString()); nodeBorderWidthProperty = new SimpleCyProperty(NodeBorderWidthInPaths, nodeBorderWidthProps, Float.TYPE, CyProperty.SavePolicy.SESSION_FILE_AND_CONFIG_DIR ); } //5. If not null, property exists, get value from it and set NodeBorderWidthInPathsValue else { nodeBorderWidthProps = nodeBorderWidthProperty.getProperties(); NodeBorderWidthInPathsValue = Double.valueOf((String)nodeBorderWidthProps.get(NodeBorderWidthInPaths)); } }}} = Events = == How to handle events from a network == '''Step 1''' {{{ #!java // Define a class, which implements a listener interface public class MyListenerClass implements NetworkAddedListener { .... public void handleEvent(NetworkAddedEvent e){ // do something here } } }}} '''Step 2''' {{{ #!java // In the `start` method of your `CyActivator` class, // register the listener in the CyActivator class registerService(bc,myListenerClass, NetworkAddedListener.class, new Properties()); }}} = Equations = == How to add new attribute functions via a Cytoscape App? == Here we will go through all the steps necessary to create a new built-in function IXOR(). The complete example code and can be downloaded from here. The easiest part is writing the actual plug-in class, which look similar to this: {{{ #!java import org.cytoscape.equations.EquationCompiler; import org.cytoscape.equations.Interpreter; import org.cytoscape.equations.EquationParser; public class Sample23 { public Sample23(EquationCompiler eqCompilerRef, Interpreter interpreterRef){ final EquationParser theParser = eqCompilerRef.getParser(); theParser.registerFunction(new IXor()); } } }}} Here we register a new built-in function called IXor. You can also register multiple built-in functions if you prefer. The next part is creating one class each for every new built-in. Each such class has to implement the org.cytoscape.equations.Function interface usually via org.cytoscape.equations.AbstractFunction. The easiest way to get started is to peruse the existing built-ins in equations Cytoscape core library and look for a function with a similar or identical argument list. If you can't find one it may still be instructive to read through the implementation of a couple of existing functions. First you have to create the constructor where you describe the arguments that your function will take: {{{ #!java public IXor() { super(new ArgDescriptor[] { new ArgDescriptor(ArgType.INT, "arg1", "A quantity that can be converted to an integer."), new ArgDescriptor(ArgType.INT, "arg2", "A quantity that can be converted to an integer."), }); }}} The most trivial to implement methods are getName(), and getFunctionSummary(). {{{ #!java /** * Used to parse the function string. This name is treated in a case-insensitive manner! * @return the name by which you must call the function when used in an attribute equation. */ public String getName() { return "IXOR"; } /** * Used to provide help for users. * @return a description of what this function does */ public String getFunctionSummary() { return "Returns an integer value that is the exclusive-or of 2 other integer values."; } }}} The next method is still simple but already touches on the one area that is somewhat complicated in attribute functions: data types and data type conversions! {{{ #!java public Class getReturnType() { return Long.class; } }}} Our example function is supposed to return an integer value. Integers in equation functions are represented as instances of class java.lang.Long. Therefore it is imperative not to return Integer.class! The user of the function can be blissfully unaware of this distinction. Just remember to always substitute Long for Integer and you should be fine. The next method evaluateFunction() is the one that gets called when an expression is being evaluated. No argument type-checking is needed here because the compiler already took care of that for us. But, we need to handle all possible valid argument types and counts. (N.B., functions may be overloaded and/or variadic.) In this example the arguments can be any combination of Long and Double. {{{ #!java public Object evaluateFunction(final Object[] args) { long arg1; try { arg1 = FunctionUtil.getArgAsLong(args[0]); } catch (final Exception e) { throw new IllegalArgumentException("IXOR: can't convert the 1st argument to an integer!"); } long arg2; try { arg2 = FunctionUtil.getArgAsLong(args[0]); } catch (final Exception e) { throw new IllegalArgumentException("IXOR: can't convert the 2nd argument to an integer!"); } final long result = arg1 ^ arg2; return (Long)result; } }}} [[http://wiki.cytoscape.org/Implementing_Attribute_Equations_Functions|This tutorial]] on how to write attribute functions may also be helpful. = Web Services = |
|
Line 340: | Line 913: |
{{{ #!java }}} |
First define a listener of web service client and register it as service -- WebServiceHelper. This class will keep tracker of web service clients available using a Map. {{{ #!java public class WebServiceHelper { ... public void addWebServiceClient(final WebServiceClient newFactory, final Map properties) { webserviceMap.put(newFactory, properties); } public void removeWebServiceClient(final WebServiceClient factory, final Map properties) { webserviceMap.remove(factory); } ... } }}} At running time, check if the needed service is available by looking at the map. {{{ #!java Iterator<WebServiceClient> it = webserviceMap.keySet().iterator(); while (it.hasNext()){ WebServiceClient client = it.next(); // Based on the serviceLocation, we can find if the client we are looking for is available System.out.println("WebService CLient client: DisplayName() is "+client.getDisplayName()); System.out.println("WebService CLient client: ServiceLocation() is "+client.getServiceLocation()); .... } }}} If the needed client is found, then we can construct the query and execute the query through the API of the client. |
Line 347: | Line 953: |
{{{ #!java }}} == How to use the VizMapper programmatically? == {{{ #!java }}} == How to apply a continuous color gradient to nodes according to their degree? == {{{ #!java }}} == How to load a visual properties file? == 1. Get the service 'LoadVisualStyles' {{{ #!java }}} 2. Define a task to load the vizMap property file {{{ #!java }}} 3. Apply the newly loaded visual style to a network view {{{ #!java }}} == How to write a layout algorithm? == {{{ #!java }}} == How to write a Group Viewer? == {{{ #!java }}} == How to add components to the node view, edge view, and attribute browser context menus? == {{{ #!java }}} == How to save/restore plugin states? == {{{ #!java }}} == How to use the Cytoscape task monitor to show the progress of my job? == {{{ #!java }}} == How to add new attribute functions via a Cytoscape plug-in? == {{{ #!java }}} |
'''Step 1''': Define a UI class for the setting of the client. This UI may listen to Cytoscape events {{{ #!java public class MyWebserviceClientPanel extends JPanel implements ColumnCreatedListener, ColumnDeletedListener, SetCurrentNetworkListener { ... } }}} '''Step 2''': Define a client class, which must implement WebServiceClient and pass the UI class defined at previous step to the client. If UI is not defined, the default UI will be used. {{{ #!java public class MyWebserviceClient extends AbstractWebServiceGUIClient implements TableImportWebServiceClient { ... } }}} '''Step 3''': After the client is registered as service, the client can be find under File-->Import->Table-->Public databases... = Help = |
Line 428: | Line 976: |
{{{ #!java }}} == How to add NetworkViewTaskFactories to the right click or double click menus on network view? == First the customized TaskFactory must implement NetworkViewTaskFactory interface or extend AbstractNetworkViewTaskFactory. Secondly, the service property "preferredAction" should be set to be "OPEN" for double click, or "NEW" for right click menu. {{{ #!java MyNetworkViewTaskFactory myNetworkViewTaskFactory = new MyNetworkViewTaskFactory(applicationManagerManagerServiceRef); // Add double click menu to the network view Properties myNetworkViewTaskFactoryProps = new Properties(); myNetworkViewTaskFactoryProps.setProperty("preferredAction","OPEN"); myNetworkViewTaskFactoryProps.setProperty("title","my title"); // Register the service registerService(bc,myNetworkViewTaskFactory,NetworkViewTaskFactory.class, myNetworkViewTaskFactoryProps); }}} This also applies to add menu item to the double click / right click of nodeView or edgeView. {{{ #!java // To add a right click menu item on node view, set "preferredAction" to "NEW" MyNodeViewTaskFactory myNodeViewTaskFactory = new MyNodeViewTaskFactory(); // Add double click menu item to the node view Properties myNodeViewTaskFactoryProps = new Properties(); myNodeViewTaskFactoryProps.setProperty("preferredAction","NEW"); myNodeViewTaskFactoryProps.setProperty("title","my node action"); // Register the service registerService(bc,myNodeViewTaskFactory,NodeViewTaskFactory.class, myNodeViewTaskFactoryProps); }}} == How to save/restore app states? == {{{ #!java }}} = Trouble shooting = If you get compile error, 1. Check the version number of parent POM, the latest is at [[http://chianti.ucsd.edu/svn/core3/parent/trunk|Cytoscape repository]] 1. If this is a dependency problem, check the version number of depended bundle at [[http://cytoscape.wodaklab.org/nexus/index.html|Cytoscape repository]] = Recommendations = 1. If you’re a beginner you probably want to use the Simple app type. see example02a, example03a 1. If you want to port as quickly as possible, again, go with the Simple app type. 1. If you want to publish an API you must use the Bundle app type 1. If you experience version conflicts or anticipate future version conflicts, again you must use the Bundle app type. 1. If you are in doubt, you should probably use the Simple app type. You can always port it to the Bundle app type later should that become necessary. Both styles are supported and will be until (at least) version 4.0. = App Porting Hints = How to 1. get current network --- see sample app 5 1. get attributes --- see sample app 11 1. add a menu item --- see sample app 3 = Questions, suggestions = Please send e-mail to [[http://groups.google.com/group/cytoscape-helpdesk?pli=1|cytoscape help desk]] or [[http://groups.google.com/group/cytoscape-discuss|discussion group]] |
If you download Sample 24 and instal and copy the jar to the deploy directory fo your running Cytoscape, you will see topic '''Sample 24 help''' is added to your help panel (Help --> Contents...). In order to make it simpler, you can download the [[http://chianti.ucsd.edu/svn/core3/samples/trunk/sample24/src/main/resources/help/|help]] directory in the sampel 24 trunk and copy this folder to your project's resources folder. Next you need to get the {{{CyHelpBroker}}} service in your CyActivator class. The code in sample 24: {{{ #!java import java.util.Properties; import org.cytoscape.application.swing.CyHelpBroker; import org.cytoscape.service.util.AbstractCyActivator; import org.osgi.framework.BundleContext; public class CyActivator extends AbstractCyActivator { @Override public void start(BundleContext context) throws Exception { CyHelpBroker cyHelpBroker = getService(context, CyHelpBroker.class); AppHelp action = new AppHelp(cyHelpBroker); registerAllServices(context, action, new Properties()); } } }}} In the main entry point of your plug-in, add the following function: {{{ #!java ... import java.net.URL; import org.cytoscape.application.swing.CyHelpBroker; import javax.help.HelpSet; ... /** * Hook plugin help into the Cytoscape main help system: */ private void addHelp() { final String HELP_SET_NAME = "/help/jhelpset"; final ClassLoader classLoader = AppHelp.class.getClassLoader(); URL helpSetURL; try { helpSetURL = HelpSet.findHelpSet(classLoader, HELP_SET_NAME); final HelpSet newHelpSet = new HelpSet(classLoader, helpSetURL); cyHelpBroker.getHelpSet().add(newHelpSet); } catch (final Exception e) { System.err.println("Sample24: Could not find help set: \"" + HELP_SET_NAME + "!"); } } }}} Invoke this function somewhere in the constructor for the class. Finally, edit the files in the help directory. Most likely you would want to edit the files named {{{jhelpmap.jhm}}} and {{{Topic.html}}}. You may consider removing both, {{{SubTopic.html}}} and the reference to it in {{{jhelpmap.jhm}}}. You can also add additional topics, if you want. The effect this will have is to add a new topic at the very bottom of the Cytoscape help index. You may have a help button in your plug-in, in which case you would probably want to add code similar to the following: {{{ #!java ... import cytoscape.view.CyHelpBroker; ... CyHelpBroker.getHelpBroker().enableHelpOnButton(helpButton, "Topic", null); ... }}} That should be all that is needed to dynamically add your own help topic(s)! = OSGi = == An easier way to construct service properties == Writing code to put in service properties requires a lot of boilerplate. Here's an example: {{{ #!java public void start(BundleContext bc) { Properties props = new Properties(); props.put(TITLE, "My app"); props.put(PREFERRED_MENU, "Apps"); TaskFactory myTaskFactory = ...; registerService(bc, myTaskFactory, props); } }}} To avoid having to construct a {{{Properties}}} object manually for each service, you can use the {{{ezProps}}} method: {{{ #!java private static Properties ezProps(String... vals) { final Properties props = new Properties(); for (int i = 0; i < vals.length; i += 2) props.put(vals[i], vals[i + 1]); return props; } }}} The example above can be reworked using {{{ezProps}}}: {{{ #!java public void start(BundleContext bc) { TaskFactory myTaskFactory = ...; registerService(bc, myTaskFactory, ezProps( TITLE, "My app", PREFERRED_MENU, "Apps")); } }}} |
Do you want to share your own code snippet?
Let us know! Send a message to Cytoscape Discuss to have your snippet included in this cookbook.
Contents
- Do you want to share your own code snippet?
- Swing Application
-
Model
- How to create, modify, and destroy a network, nodes, and edges?
- How to determine which nodes are currently selected on a network?
- How to set the name of a network?
- How to get the name of a network?
- How to set the name of a node?
- How to get the name of a node?
- How to load attribute data?
- How to remove attributes?
- How to get all the nodes with a specific attribute value?
- How to use model objects (CyNetwork, CyNode, etc.) when writing tests?
-
View Model
- Getting node views for newly created nodes?
- How to create, modify, and destroy a network view?
- How to change the background color of a view?
- How to zoom a network view?
- How to get and set node coordinate positions?
- How to write a layout algorithm?
- How to add components to the node view, edge view, and attribute browser context menus?
- VizMapper
- I/O
- Work
- Session
- Events
- Equations
- Web Services
- Help
- OSGi
Swing Application
How to add a tabbed Panel to Control panel?
In Cytoscape desktop, there are three CytoPanels, Control panel, data panel and result panel, located at West, south and east, respectively. New tabbed panel can be easily added to the CytoPanel. All the app developer should do is (1) defines a JPanel, which implements the CytoPanelComponnet; (2) register the new panel as OSGi service. The internal CytoPanel manager will automatically pick up the newly registered service identified as CytoPanelComponent and adds the new panel to the specified target CytoPanel.
Step 1
1 // Define a CytoPanel class
2 public class MyCytoPanel extends JPanel implements CytoPanelComponent {
3
4 ...
5 @Override
6 public CytoPanelName getCytoPanelName() {
7 return CytoPanelName.WEST;
8 }
9 ...
10 }
11
Step 2
1 // In the start method of your CyActivator class:
2 // Create an instance:
3 MyCytoPanel myPanel = new MyPanel();
4 // Register it as a service:
5 registerService(bc,myCytoPanel,CytoPanelComponent.class, new Properties());
6
Look at a sample App, Here.
How to add an image icon (menu item) to the toolbar?
Sometimes, an app needs to add an menu item to the cytoscape menu or add an image icon on the Cytoscape toolbar. In such case, app developer needs to (1) define a class, which implements CyAction or extends AbstractCyAction; (2) and register the class as an OSGi service. The internal CyAction manger of Cytoscape will pick up the registered service and create the menu item as defined. Note the methods isInToolbar() and isInMenu(), its return value true or false will determine if menu item or image icon will be created or not.
Step 1
1 // Define a CyAction class
2 public class AddImageIconAction extends AbstractCyAction {
3
4 public AddImageIconAction(CySwingApplication desktopApp){
5 ...
6 ImageIcon icon = new ImageIcon(getClass().getResource("/images/tiger.jpg"));
7
8 putValue(LARGE_ICON_KEY, icon);
9 ...
10 }
11
12 public boolean isInToolBar() {
13 return true;
14 }
15 ...
16 }
17
Step 2
1 // In the start method of your CyActivator class:
2 // Create an instance:
3 AddImageIconAction addImageIconAction = new AddImageIconAction(cytoscapeDesktopService);
4 // Register it as a service:
5 registerService(bc,addImageIconAction,CyAction.class, new Properties());
6
Look at a sample App, Here.
How to create a submenu?
The way to define a submenu item is similar to define a menu item. Besides the definition of menu item itself, it is also necessary to define its parent menu item, see below.
Step 1
1 // Define a CyAction class
2 public class MySubMenuItemAction extends AbstractCyAction {
3 ...
4 public MySubMenuItemAction(CySwingApplication desktopApp){
5 super("My Sub MenuItem...");
6 setPreferredMenu("Apps.My MenuItem");
7 //setMenuGravity(2.0f);
8 ...
9 }
10
Step 2
1 // In the start method of your CyActivator class:
2 // Create an instance:
3 MySubMenuItemAction action = new MySubMenuItemAction(cytoscapeDesktopService);
4
5 // Register it as a service:
6 registerService(bc,action,CyAction.class, new Properties());
7
Look at a sample App, here.
Model
How to create, modify, and destroy a network, nodes, and edges?
To create a network, get a reference to the CyNetworkFactory service, and tell it to create a network. With the new network, nodes and edges can be created through the CyNetwork interface.
1 // To get a reference of CyNetworkFactory at CyActivator class of the App
2 CyNetworkFactory networkFactory = getService(bc, CyNetworkFactory.class);
3 ...
4
5 // Create a new network
6 CyNetwork myNet = networkFactory.createNetwork();
7
8 // Set name for network
9 myNet.getRow(net).set(CyNetwork.NAME, "My network");
10 ...
11
12 // Add two nodes to the network
13 CyNode node1 = myNet.addNode();
14 CyNode node2 = myNet.addNode();
15
16 // Set name for new nodes
17 myNet.getRow(node1).set(CyNetwork.NAME, "Node1");
18 myNet.getRow(node2).set(CyNetwork.NAME, "Node2");
19
20 // Add an edge
21 myNet.addEdge(node1, node2, true);
22
23 // Add the network to Cytoscape
24 CyNetworkManager networkManager = getService(bc, CyNetworkManager.class);
25 networkManager.addNetwork(myNet);
26
Destroying networks is done through the CyNetworkManager service.
First, in the start method of your CyActivator class:
1 // Get a CyNetworkManager
2 CyNetworkManager netMgr = getService(bc,CyNetworkManager.class);
3
Now you can use CyNetworkManager in your code:
1 // Destroy a network with NetworkManager
2 netMgr.destroyNetwork(myNet);
3
Look at a sample App, here.
How to determine which nodes are currently selected on a network?
The selection state of a node or edge is saved in the table associated with the network. Its attribute or column name is “selected”. Therefore, to determine the selection state of a node, we need to get the CyRow of the node and check the value of column “selected”.
There is a util class CyTableUtil. We can use this class to get the list of selected nodes in a network
1 //Get the selected nodes
2 List<CyNode> nodes = CyTableUtil.getNodesInState(myNetwork,"selected",true);
3
Look at a sample App, Here.
How to set the name of a network?
The network name is kept in the table associated with the network, and its column name is “name”. To set the network name, first we need to get the CyRow of the network object, then set the “name” attribute of this row.
1 CyNetwork net = ...;
2 String name = ...;
3 net.getRow(net).set(CyNetwork.NAME, name);
4
Look at a sample App, here.
How to get the name of a network?
The network title is kept in the table associated with the network, and its column name is “name”. To set the network name/title, first we need to get the CyRow of the network object, then get the “name” attribute of this row.
1 CyNetwork net = ...;
2 String name = net.getRow(net).get(CyNetwork.NAME, String.class);
3
How to set the name of a node?
The name of a node is kept in the CyRow of the table associated with the network, and its column name is “name”. To set the node name, first we need to get the CyRow of the node object, then set the “name” attribute of this row.
1 CyNode node = ...;
2 String myNodeName = ...;
3 net.getRow(node).set(CyNetwork.NAME, myNodeName);
4
Look at a sample App, here.
How to get the name of a node?
The name of a node is kept in the CyRow of the table associated with the network, and its column name is “name”. To get the node name, first we need to get the CyRow of the node object, then get the “name” attribute of this row.
1 CyNode node = ...;
2 String myNodeName = net.getRow(node).get(CyNetwork.NAME, String.class);
3
How to load attribute data?
1 // Define a task
2 public class CreateTableTask extends AbstractTask {
3 ....
4 @Override
5 public void run(TaskMonitor tm) throws IOException {
6 // Step 1: create a new table
7 CyTable table = tableFactory.createTable("MyAttrTable " + Integer.toString(numImports++),
8 "name", String.class, true, true);
9
10 // create a column for the table
11 String attributeName = "MyAttributeName";
12 table.createColumn(attributeName, Integer.class, false);
13
14 // Step 2: populate the table with some data
15 String[] keys = {"YLL021W","YBR170C","YLR249W"}; //map to the the "name" column
16 CyRow row = table.getRow(keys[0]);
17 row.set(attributeName, new Integer(2));
18
19 row = table.getRow(keys[1]);
20 row.set(attributeName, new Integer(3));
21
22 row = table.getRow(keys[2]);
23 row.set(attributeName, new Integer(4));
24
25 // We are loading node attribute
26 Class<? extends CyTableEntry> type = CyNode.class;
27
28 // Step 3: pass the new table to MapNetworkAttrTask
29 super.insertTasksAfterCurrentTask( new MapNetworkAttrTask(type,table,netMgr,appMgr,rootNetworkManager) );
30 }
31 ....
32 }
33
How to remove attributes?
Step 1: get the CyTable through the network
1 // case for Node table
2 CyTable nodeTable = network.getDefaultNodeTable();
3
Step 2: Find the column and delete it
1 if(nodeTable.getColumn(columnName)!= null){
2 nodeTable.deleteColumn(columnName);
3 }
4
How to get all the nodes with a specific attribute value?
Copy this method in your code:
1 /**
2 * Get all the nodes with a given attribute value.
3 *
4 * This method is effectively a wrapper around {@link CyTable#getMatchingRows}.
5 * It converts the table's primary keys (assuming they are node SUIDs) back to
6 * nodes in the network.
7 *
8 * Here is an example of using this method to find all nodes with a given name:
9 *
10 * {@code
11 * CyNetwork net = ...;
12 * String nodeNameToSearchFor = ...;
13 * Set<CyNode> nodes = getNodesWithValue(net, net.getDefaultNodeTable(), "name", nodeNameToSearchFor);
14 * // nodes now contains all CyNodes with the name specified by nodeNameToSearchFor
15 * }
16 * @param net The network that contains the nodes you are looking for.
17 * @param table The node table that has the attribute value you are looking for;
18 * the primary keys of this table <i>must</i> be SUIDs of nodes in {@code net}.
19 * @param colname The name of the column with the attribute value
20 * @param value The attribute value
21 * @return A set of {@code CyNode}s with a matching value, or an empty set if no nodes match.
22 */
23 private static Set<CyNode> getNodesWithValue(
24 final CyNetwork net, final CyTable table,
25 final String colname, final Object value)
26 {
27 final Collection<CyRow> matchingRows = table.getMatchingRows(colname, value);
28 final Set<CyNode> nodes = new HashSet<CyNode>();
29 final String primaryKeyColname = table.getPrimaryKey().getName();
30 for (final CyRow row : matchingRows)
31 {
32 final Long nodeId = row.get(primaryKeyColname, Long.class);
33 if (nodeId == null)
34 continue;
35 final CyNode node = net.getNode(nodeId);
36 if (node == null)
37 continue;
38 nodes.add(node);
39 }
40 return nodes;
41 }
42
How to use model objects (CyNetwork, CyNode, etc.) when writing tests?
Step 1. Include the JUnit framework as a dependency in your pom.xml:
<dependency> <groupId>junit</groupId> <artifactId>junit</artifactId> <scope>test</scope> </dependency>
Step 2. Include the model-impl package as a dependency in your pom.xml:
<dependency> <groupId>org.cytoscape</groupId> <artifactId>model-impl</artifactId> <version>${cytoscape.api.version}</version> <scope>test</scope> </dependency>
Step 3. In your testing code, use NetworkTestSupport to get a CyNetwork instance:
1 import org.cytoscape.model.NetworkTestSupport;
2
3 ...
4
5 final NetworkTestSupport nts = new NetworkTestSupport();
6 final CyNetwork network = nts.getNetwork();
7
8 // Now you have a CyNetwork!
9
View Model
Getting node views for newly created nodes?
After creating a node and edge, this is how to get its view:
1 CyNetworkView networkView = ...;
2 CyNetwork network = networkView.getModel();
3 CyEventHelper eventHelper = ...;
4 CyNode newNode = network.addNode();
5 network.getRow(newNode).set(CyNetwork.NAME, "New Node");
6 eventHelper.flushPayloadEvents();
7 View<CyNode> newNodeView = networkView.getNodeView(newNode);
8
After creating the node in CyNetwork, you have to call CyEventHelper's flushPayloadEvents so that the new node gets a node view. If flushPayloadEvents is not called, getNodeView may return null.
If you are creating a bunch of nodes at once, call flushPayloadEvents after you have finished creating all the nodes, not after each node is created. Example:
1 CyNetworkView networkView = ...;
2 CyNetwork network = networkView.getModel();
3 CyEventHelper eventHelper = ...;
4
5 for (int i = 1; i <= 100; i++) {
6 CyNode node = network.addNode();
7 network.getRow(newNode).set(CyNetwork.NAME, "Node " + i);
8 }
9 eventHelper.flushPayloadEvents();
10
How to create, modify, and destroy a network view?
To create a network, get a reference to the CyNetworkViewFactory service, and tell it to create a network view.
First, in the start method of your CyActivator class:
1 // Get a CyNetworkViewFactory
2 CyNetworkViewFactory networkViewFactory = getService(bc, CyNetworkViewFactory.class);
3
Now you can use CyNetworkViewFactory in your code:
1 // Create a new network view
2 CyNetworkView myView = networkViewFactory.createNetworkView(myNet);
3
4 // Add view to Cytoscape
5 CyNetworkViewManager networkViewManager = getService(bc, CyNetworkViewManager.class);
6 networkViewManager.addNetworkView(myView);
7
Destroying network views is done through the CyNetworkViewManager service.
First, in the start method of your CyActivator class:
1 // get a CyNetworkViewManager
2 CyNetworkViewManager networkViewManager = getService(bc, CyNetworkViewManager.class);
3
Now you can use CyNetworkViewManager in your code:
1 // destroy a network view through NetworkViewManager
2 networkViewManager.destroyNetworkView(myView);
3
How to change the background color of a view?
Network background color is changed as a _visual property_.
1 // Set the background of current view to RED
2 view.setVisualProperty(BasicVisualLexicon.NETWORK_BACKGROUND_PAINT, Color.red);
3 view.updateView();
4
How to zoom a network view?
1 // Get the scale and adjust
2 double newScale = view.getVisualProperty(NETWORK_SCALE_FACTOR).doubleValue() * scale;
3 view.setVisualProperty(NETWORK_SCALE_FACTOR, newScale);
4 ...
5 view.updateView();
6
How to get and set node coordinate positions?
Given a View<CyNode>, here's how to get its x and y coordinate positions:
1 View<CyNode> nodeView = ...;
2 Double x = nodeView.getVisualProperty(BasicVisualLexicon.NODE_X_LOCATION);
3 Double y = nodeView.getVisualProperty(BasicVisualLexicon.NODE_Y_LOCATION);
4
Here's how to set the x and y coordinate positions:
1 View<CyNode> nodeView = ...;
2 double x = ...;
3 double y = ...;
4 nodeView.setVisualProperty(BasicVisualLexicon.NODE_X_LOCATION, x);
5 nodeView.setVisualProperty(BasicVisualLexicon.NODE_Y_LOCATION, y);
6
How to write a layout algorithm?
First define a layout class, which implements CyLayoutAlgorithm interface or extends AbstractLayoutAlgorithm class. Then register the layout class as a service.
1 // Define a layout class
2 public class MyLayout extends AbstractLayoutAlgorithm {
3 ...
4 }
5
6
7 // Define a layout task class
8 public class MyLayoutTask extends AbstractLayoutTask {
9 ...
10
11 //Perform actual layout task
12 final protected void doLayout(final TaskMonitor taskMonitor) {
13 ...
14 }
15 ...
16 }
17
18
19 // Register the layout class as a service in CyActivator class
20 Properties myLayoutProps = new Properties();
21 myLayoutProps.setProperty("preferredMenu","My Layouts");
22 registerService(bc,myLayout,CyLayoutAlgorithm.class, myLayoutProps);
23
How to add components to the node view, edge view, and attribute browser context menus?
To add a context menu to a NodeView, define a class, which extends AbstractNodeViewTaskFactory, and register the NodeViewTaskFactory as service. We can add the title of menu item by setting the service property when we register the nodeViewTaskFactory.
To add context menu to the table browser, define a class, which extends AbstractTableCellTaskFactory. Create an instance and register it as service (Note register as TableCellTaskFactory).
1 // Define a class MyNodeViewTaskFactory
2 public class MyNodeViewTaskFactory extends AbstractNodeViewTaskFactory {
3 ...
4 }
5
6
7 // Register myNodeViewTaskFactory as a service in CyActivator
8 Properties myNodeViewTaskFactoryProps = new Properties();
9 myNodeViewTaskFactoryProps.setProperty("title","My context menu title");
10 registerService(bc,myNodeViewTaskFactory,NodeViewTaskFactory.class, myNodeViewTaskFactoryProps);
11
VizMapper
How to use the VizMapper programmatically?
Cytosape provides services for using visual mapping programming. There services are VisualMappingManager, VisualStyleFactory and VisualMappingFunctionFactory. App should get references to these services in CyActivator class, the entry point of the app. We can create new visualStyle with VisualStyleFactory and create mapping function with VisualMappingFunctionFactory very easily. After a new visual style is created, it should register with the VisualMappingManger, in this way the new visual style will be available throughout Cytoscape.
1 // To get references to services in CyActivator class
2 VisualMappingManager vmmServiceRef = getService(bc,VisualMappingManager.class);
3
4 VisualStyleFactory visualStyleFactoryServiceRef = getService(bc,VisualStyleFactory.class);
5
6 VisualMappingFunctionFactory vmfFactoryC = getService(bc,VisualMappingFunctionFactory.class, "(mapping.type=continuous)");
7 VisualMappingFunctionFactory vmfFactoryD = getService(bc,VisualMappingFunctionFactory.class, "(mapping.type=discrete)");
8 VisualMappingFunctionFactory vmfFactoryP = getService(bc,VisualMappingFunctionFactory.class, "(mapping.type=passthrough)");
9
10
11 // To create a new VisualStyle object and set the mapping function
12 VisualStyle vs= this.visualStyleFactoryServiceRef.createVisualStyle("My visual style");
13
14
15 //Use pass-through mapping
16 String ctrAttrName1 = "SUID";
17 PassthroughMapping pMapping = (PassthroughMapping) vmfFactoryP.createVisualMappingFunction(ctrAttrName1, String.class, attrForTest, BasicVisualLexicon.NODE_LABEL);
18
19 vs.addVisualMappingFunction(pMapping);
20
21
22 // Add the new style to the VisualMappingManager
23 vmmServiceRef.addVisualStyle(vs);
24
25
26 // Apply the visual style to a NetwokView
27 vs.apply(myNetworkView);
28 myNetworkView.updateView();
29
How to apply a continuous color gradient to nodes according to their degree?
1
2 // Set node color map to attribute "Degree"
3 ContinuousMapping mapping = (ContinuousMapping)
4 this.continuousMappingFactoryServiceRef.createVisualMappingFunction("Degree", Integer.class, BasicVisualLexicon.NODE_FILL_COLOR);
5
6 // Define the points
7 Double val1 = 2d;
8 BoundaryRangeValues<Paint> brv1 = new BoundaryRangeValues<Paint>(Color.RED, Color.GREEN, Color.PINK);
9
10 Double val2 = 12d;
11 BoundaryRangeValues<Paint> brv2 = new BoundaryRangeValues<Paint>(Color.WHITE, Color.YELLOW, Color.BLACK);
12
13 // Set the points
14 mapping.addPoint(val1, brv1);
15 mapping.addPoint(val2, brv2);
16
17 // add the mapping to visual style
18 vs.addVisualMappingFunction(mapping);
19
How to load a visual properties file?
Cytoscape provide a service 'LoadVizmapFileTaskFactory' for loading visual styles definded in a property file.
1 // get a reference to Cytoscape service -- LoadVizmapFileTaskFactory
2 LoadVizmapFileTaskFactory loadVizmapFileTaskFactory = getService(bc,LoadVizmapFileTaskFactory.class);
3
1 // Use the service to load visual style, 'f' is the File object to hold the visual properties
2 Set<VisualStyle> vsSet = loadVizmapFileTaskFactory.loadStyles(f);
3
I/O
How to build a network reader to support my own format?
First, we should define the format of my network file and its file extension. Let's say, each line in our network file has two columns, tab-delimited. And we define file extension '.tc', stands for 'two columns'.
1 //1. define a file filter (BasicCyFileFilter), to support the reader to read the file with extension '.tc'
2 HashSet<String> extensions = new HashSet<String>();
3 extensions.add("tc");
4 HashSet<String> contentTypes = new HashSet<String>();
5 contentTypes.add("txt");
6 String description = "My test filter";
7 DataCategory category = DataCategory.NETWORK;
8 BasicCyFileFilter filter = new BasicCyFileFilter(extensions,contentTypes, description, category, swingAdapter.getStreamUtil());
9
10
11 //2. Create an instance of the ReaderFactory
12 // Note that extends TCReaderFactory must implement the interface InputStreamTaskFactory or extends the class AbstractInputStreamTaskFactory.
13 // And the defined task must implement CyNetworkReader
14 TCReaderFactory factory = new TCReaderFactory(filter, swingAdapter.getCyNetworkFactory(), swingAdapter.getCyNetworkViewFactory());
15
16
17
18 //3. register the ReaderFactory as an InputStreamTaskFactory.
19 Properties props = new Properties();
20 props.setProperty("readerDescription","TC file reader");
21 props.setProperty("readerId","tcNetworkReader");
22 swingAdapter.getCyServiceRegistrar().registerService(factory, InputStreamTaskFactory.class, props);
23
Compile [http://chianti.ucsd.edu/svn/core3/samples/trunk/sample27a|this sample code], and install the app in Cytoscape. When we try to import a network from a file (File-->Import-->Network-->File..), we will find file type '.tc' is listed as one of the file types supported by Cytoscape.
Work
How to use the Cytoscape task monitor to show the progress of my job?
Get a Cytoscape service DialogTaskManager and execute the task through the taskManager.
1 // Get a Cytoscape service 'DialogTaskManager' in CyActivator class
2 DialogTaskManager dialogTaskManager = getService(bc, DialogTaskManager.class);
3
4
5 // Define a task and set the progress in the run() method
6 public class MyTask extends AbstractTask {
7 ...
8 public void run(final TaskMonitor taskMonitor) {
9 // Give the task a title.
10 taskMonitor.setTitle("My task");
11 ...
12 taskMonitor.setProgress(0.1);
13
14 // do something here
15
16 ...
17 taskMonitor.setProgress(1.0);
18 }
19
20
21 // Execute the task through the TaskManager
22 DialogTaskManager.execute(myTaskFactory);
23
How to issue non-blocking, informational messages to users?
Cytoscape 3.0 has a status bar at the bottom of the Cytoscape desktop window. Tasks can put messages into the status bar. These messages wouldn't require immediate user attention but are informational. Debug messages useful for developers do not belong in the status bar.
To issue user messages to the status bar:
Step 1. Include the SLF4J library as a dependency in your pom.xml file.
<dependency> <groupId>org.slf4j</groupId> <artifactId>slf4j-api</artifactId> <version>1.6.6</version> </dependency> <dependency> <groupId>org.slf4j</groupId> <artifactId>slf4j-simple</artifactId> </dependency>
Step 2. Obtain an instance of the CyUserMessages log.
1 import org.slf4j.LoggerFactory;
2 import org.slf4j.Logger;
3 ...
4 Logger userMessagesLogger = LoggerFactory.getLogger("CyUserMessages");
5
Step 3. Issue log messages to the CyUserMessages log.
1 int lineError = 12;
2 userMessagesLogger.warn("Parse error on line {}", lineError);
3
The message will appear in the status bar.
Session
How to save/restore app states?
There are two events, which are important for saving/restoring App state. The two evetns are SessionAboutToBeSavedEvent and SessionLoadedEvent. App should implement the two listeners and register them.
1 // Implements the session event listeners
2 public class MyClass implements SessionAboutToBeSavedListener, SessionLoadedListener {
3
4 // Save app state in a file
5 public void handleEvent(SessionAboutToBeSavedEvent e){
6 // save app state file "myAppStateFile"
7 ...
8 }
9
10 // restore app state from a file
11 public void handleEvent(SessionLoadedEvent e){
12
13 if (e.getLoadedSession().getAppFileListMap() == null || e.getLoadedSession().getAppFileListMap().size() ==0){
14 return;
15 }
16 List<File> files = e.getLoadedSession().getAppFileListMap().get("myAppStateFile");
17 ...
18 }
19 }
20
21
22 // Register the two listeners in the CyActivator class
23 registerService(bc,myClass,SessionAboutToBeSavedListener.class, new Properties());
24 registerService(bc,myClass,SessionLoadedListener.class, new Properties());
25
How to add CyProperty to save values across sessions?
CyProperty acts as a container to save properties of the type (key, value) across sessions. They are available for the user to manually change in the preference menu option.
1 //1. Adding a property which saves the node border width selected by the user.
2 public static String NodeBorderWidthInPaths = "NODE_BORDER_WIDTH_IN_PATHS";
3 public static Double NodeBorderWidthInPathsValue = 20.0;
4 public static Properties nodeBorderWidthProps = new Properties();
5
6 //2. Find if the CyProperty already exists, if not create one with default value.
7 CyProperty<Properties> nodeBorderWidthProperty = null;
8 CySessionManager mySessionManager;
9 mySessionManager = adapter.getCySessionManager();
10 CySession session;
11 session = mySessionManager.getCurrentSession();
12 if(session.equals(null))
13 System.out.println("session null");
14
15 //3. Get all properties and loop through to find your own.
16 Set<CyProperty<?>> props = new HashSet<CyProperty<?>>();
17 props = session.getProperties();
18 if(props.equals(null))
19 System.out.println("props null");
20 boolean flag = false;
21
22 for (CyProperty<?> prop : props) {
23 if (prop.getName() != null){
24 if (prop.getName().equals(NodeBorderWidthInPaths)) {
25 nodeBorderWidthProperty = (CyProperty<Properties>) prop;
26 flag = true;
27 break;
28 }
29 }
30 }
31
32 //4. If the property does not exists, create nodeBorderWidthProperty
33 if (!flag)
34 {
35 nodeBorderWidthProps.setProperty(NodeBorderWidthInPaths, NodeBorderWidthInPathsValue.toString());
36 nodeBorderWidthProperty = new
37 SimpleCyProperty(NodeBorderWidthInPaths,
38 nodeBorderWidthProps, Float.TYPE, CyProperty.SavePolicy.SESSION_FILE_AND_CONFIG_DIR );
39 }
40 //5. If not null, property exists, get value from it and set NodeBorderWidthInPathsValue
41 else
42 {
43 nodeBorderWidthProps = nodeBorderWidthProperty.getProperties();
44 NodeBorderWidthInPathsValue = Double.valueOf((String)nodeBorderWidthProps.get(NodeBorderWidthInPaths));
45 }
46
Events
How to handle events from a network
Step 1
1 // Define a class, which implements a listener interface
2 public class MyListenerClass implements NetworkAddedListener {
3 ....
4 public void handleEvent(NetworkAddedEvent e){
5 // do something here
6 }
7 }
8
Step 2
1 // In the `start` method of your `CyActivator` class,
2 // register the listener in the CyActivator class
3 registerService(bc,myListenerClass, NetworkAddedListener.class, new Properties());
4
Equations
How to add new attribute functions via a Cytoscape App?
Here we will go through all the steps necessary to create a new built-in function IXOR(). The complete example code and can be downloaded from here. The easiest part is writing the actual plug-in class, which look similar to this:
1 import org.cytoscape.equations.EquationCompiler;
2 import org.cytoscape.equations.Interpreter;
3 import org.cytoscape.equations.EquationParser;
4
5 public class Sample23 {
6
7 public Sample23(EquationCompiler eqCompilerRef, Interpreter interpreterRef){
8 final EquationParser theParser = eqCompilerRef.getParser();
9 theParser.registerFunction(new IXor());
10 }
11 }
12
Here we register a new built-in function called IXor. You can also register multiple built-in functions if you prefer.
The next part is creating one class each for every new built-in. Each such class has to implement the org.cytoscape.equations.Function interface usually via org.cytoscape.equations.AbstractFunction. The easiest way to get started is to peruse the existing built-ins in equations Cytoscape core library and look for a function with a similar or identical argument list. If you can't find one it may still be instructive to read through the implementation of a couple of existing functions.
First you have to create the constructor where you describe the arguments that your function will take:
1 public IXor() {
2 super(new ArgDescriptor[] {
3 new ArgDescriptor(ArgType.INT, "arg1", "A quantity that can be converted to an integer."),
4 new ArgDescriptor(ArgType.INT, "arg2", "A quantity that can be converted to an integer."),
5 });
6
The most trivial to implement methods are getName(), and getFunctionSummary().
1 /**
2 * Used to parse the function string. This name is treated in a case-insensitive manner!
3 * @return the name by which you must call the function when used in an attribute equation.
4 */
5 public String getName() { return "IXOR"; }
6
7 /**
8 * Used to provide help for users.
9 * @return a description of what this function does
10 */
11 public String getFunctionSummary() { return "Returns an integer value that is the exclusive-or of 2 other integer values."; }
12
The next method is still simple but already touches on the one area that is somewhat complicated in attribute functions: data types and data type conversions!
1 public Class getReturnType() { return Long.class; }
2
Our example function is supposed to return an integer value. Integers in equation functions are represented as instances of class java.lang.Long. Therefore it is imperative not to return Integer.class! The user of the function can be blissfully unaware of this distinction. Just remember to always substitute Long for Integer and you should be fine.
The next method evaluateFunction() is the one that gets called when an expression is being evaluated. No argument type-checking is needed here because the compiler already took care of that for us. But, we need to handle all possible valid argument types and counts. (N.B., functions may be overloaded and/or variadic.) In this example the arguments can be any combination of Long and Double.
1 public Object evaluateFunction(final Object[] args) {
2 long arg1;
3 try {
4 arg1 = FunctionUtil.getArgAsLong(args[0]);
5 } catch (final Exception e) {
6 throw new IllegalArgumentException("IXOR: can't convert the 1st argument to an integer!");
7 }
8
9 long arg2;
10 try {
11 arg2 = FunctionUtil.getArgAsLong(args[0]);
12 } catch (final Exception e) {
13 throw new IllegalArgumentException("IXOR: can't convert the 2nd argument to an integer!");
14 }
15
16 final long result = arg1 ^ arg2;
17 return (Long)result;
18 }
19
This tutorial on how to write attribute functions may also be helpful.
Web Services
How to use a web service client?
First define a listener of web service client and register it as service -- WebServiceHelper. This class will keep tracker of web service clients available using a Map.
1 public class WebServiceHelper {
2 ...
3 public void addWebServiceClient(final WebServiceClient newFactory,
4 final Map properties)
5 {
6 webserviceMap.put(newFactory, properties);
7 }
8
9 public void removeWebServiceClient(final WebServiceClient factory,
10 final Map properties)
11 {
12 webserviceMap.remove(factory);
13 }
14 ...
15 }
16
At running time, check if the needed service is available by looking at the map.
1 Iterator<WebServiceClient> it = webserviceMap.keySet().iterator();
2
3 while (it.hasNext()){
4 WebServiceClient client = it.next();
5 // Based on the serviceLocation, we can find if the client we are looking for is available
6 System.out.println("WebService CLient client: DisplayName() is "+client.getDisplayName());
7 System.out.println("WebService CLient client: ServiceLocation() is "+client.getServiceLocation());
8 ....
9 }
10
If the needed client is found, then we can construct the query and execute the query through the API of the client.
How to write a web service client?
Step 1: Define a UI class for the setting of the client. This UI may listen to Cytoscape events
1 public class MyWebserviceClientPanel extends JPanel implements ColumnCreatedListener, ColumnDeletedListener,
2 SetCurrentNetworkListener {
3 ...
4 }
5
Step 2: Define a client class, which must implement WebServiceClient and pass the UI class defined at previous step to the client. If UI is not defined, the default UI will be used.
1 public class MyWebserviceClient extends AbstractWebServiceGUIClient implements TableImportWebServiceClient {
2 ...
3 }
4
Step 3: After the client is registered as service, the client can be find under File-->Import->Table-->Public databases...
Help
How to add plug-in specific help to the Cytoscape main help system?
If you download Sample 24 and instal and copy the jar to the deploy directory fo your running Cytoscape, you will see topic Sample 24 help is added to your help panel (Help --> Contents...). In order to make it simpler, you can download the help directory in the sampel 24 trunk and copy this folder to your project's resources folder. Next you need to get the CyHelpBroker service in your CyActivator class. The code in sample 24:
1 import java.util.Properties;
2
3 import org.cytoscape.application.swing.CyHelpBroker;
4 import org.cytoscape.service.util.AbstractCyActivator;
5 import org.osgi.framework.BundleContext;
6
7 public class CyActivator extends AbstractCyActivator {
8
9 @Override
10 public void start(BundleContext context) throws Exception {
11
12 CyHelpBroker cyHelpBroker = getService(context, CyHelpBroker.class);
13
14 AppHelp action = new AppHelp(cyHelpBroker);
15 registerAllServices(context, action, new Properties());
16 }
17
18 }
19
In the main entry point of your plug-in, add the following function:
1 ...
2 import java.net.URL;
3 import org.cytoscape.application.swing.CyHelpBroker;
4 import javax.help.HelpSet;
5 ...
6 /**
7 * Hook plugin help into the Cytoscape main help system:
8 */
9 private void addHelp() {
10 final String HELP_SET_NAME = "/help/jhelpset";
11 final ClassLoader classLoader = AppHelp.class.getClassLoader();
12 URL helpSetURL;
13 try {
14 helpSetURL = HelpSet.findHelpSet(classLoader, HELP_SET_NAME);
15 final HelpSet newHelpSet = new HelpSet(classLoader, helpSetURL);
16 cyHelpBroker.getHelpSet().add(newHelpSet);
17 } catch (final Exception e) {
18 System.err.println("Sample24: Could not find help set: \"" + HELP_SET_NAME + "!");
19 }
20 }
21
Invoke this function somewhere in the constructor for the class. Finally, edit the files in the help directory. Most likely you would want to edit the files named jhelpmap.jhm and Topic.html. You may consider removing both, SubTopic.html and the reference to it in jhelpmap.jhm. You can also add additional topics, if you want. The effect this will have is to add a new topic at the very bottom of the Cytoscape help index. You may have a help button in your plug-in, in which case you would probably want to add code similar to the following:
1 ...
2 import cytoscape.view.CyHelpBroker;
3 ...
4 CyHelpBroker.getHelpBroker().enableHelpOnButton(helpButton, "Topic", null);
5 ...
6
That should be all that is needed to dynamically add your own help topic(s)!
OSGi
An easier way to construct service properties
Writing code to put in service properties requires a lot of boilerplate. Here's an example:
1 public void start(BundleContext bc) {
2 Properties props = new Properties();
3 props.put(TITLE, "My app");
4 props.put(PREFERRED_MENU, "Apps");
5 TaskFactory myTaskFactory = ...;
6 registerService(bc, myTaskFactory, props);
7 }
8
To avoid having to construct a Properties object manually for each service, you can use the ezProps method:
1 private static Properties ezProps(String... vals) {
2 final Properties props = new Properties();
3 for (int i = 0; i < vals.length; i += 2)
4 props.put(vals[i], vals[i + 1]);
5 return props;
6 }
7
The example above can be reworked using ezProps:
1 public void start(BundleContext bc) {
2 TaskFactory myTaskFactory = ...;
3 registerService(bc, myTaskFactory, ezProps(
4 TITLE, "My app",
5 PREFERRED_MENU, "Apps"));
6 }
7