Diff for "Cytoscape_2.7/UI Test Cases/Select menu - main"

Differences between revisions 1 and 2

UI Test Cases for Select Menu - Main

Preconditions	Test Case ID	Instructions	Expected Results	Date Executed	Pass/Fail
1. Start Cytoscape 2. Import a network file (eg. galFiltered.sif) 3. Click on Select from the toolbar	S1.1	1. Choose Mouse Drag Selects → Nodes Only 2. Click and drag over a portion of the graph	Ensure that only nodes are selected and no edges
	S1.2	1. Choose Mouse Drag Selects → Edges Only 2. Repeat step 2 from S1.1	Ensure that only edges are selected and no nodes
	S1.3	1. Choose Mouse Drag Selects → Nodes and Edges 2. Repeat step 2 from S1.1	Ensure that both nodes and edges are selected
	S4	Click on Select all nodes and edges	All the nodes and edges in the network should be selected
	S5	Click on Deselect all nodes and edges	None of the nodes or edges in the network should be selected
	S6	Using Old Filters is detailed under the core plugin test cases Old Filters Test Cases
	S7	Using Filters is detailed under the core plugin test cases Filters Test Cases

UI Test Cases for Select Menu - Edges sub menu

Preconditions	Test Case ID	Instructions	Expected Results	Date Executed	Pass/Fail
1. Start Cytoscape 2. Import a network file (eg. galFiltered.sif) 3. Click on Select from the toolbar	S3.1	1. Click and drag over a portion of the graph 2. Choose Edges → Invert edge selection	The edges that were selected should be deselected and the edges that were not initially selected should be highlighted
	S3.2	1. Repeat step 1 from S3.1 2. Choose Edges → Hide edge selection	The selected edges should now be invisible
	S3.3	Choose Edges → Show all edges	The edges that were hidden in S3.3 should now be visible with all the other edges in the network
	S3.4	Choose Edges → Select all edges	All the edges in the network should be selected
	S3.5	Choose Edges → Deselect all edges	All the edges in the network should be deselected and not highlighted
	S3.6	1. Hold shift and click on 5 nodes 2. Choose Edges → Select adjacent edges	All the edges connected to these nodes should be selected
	S3.7	1. Select an edge 2. Hold Ctrl (or command) and click on a point on the edge 3. Repeat step 2 further up the edge 4. Click on the edge and drag it into a zig-zag 5. Choose Edges → Smooth selected edges	The edge should change from a zig-zag to a smooth curve
	S3.8	1. Select the curved edge created in S3.7 2. Choose Edge → Straighten selected edge	The curved edge should now be a straight zig-zag again

Cytoscape_2.7/UI Test Cases/Select menu - main (last edited 2010-02-23 18:35:37 by 142)

-  ← Revision 1 as of 2010-02-09 21:19:13 →
  Size: 1333
  Editor: 142
  Comment:
+  ← Revision 2 as of 2010-02-16 19:13:29 →
  Size: 2996
  Editor: 142
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 10:
+== UI Test Cases for Select Menu - Edges sub menu ==

||'''Preconditions'''||'''Test Case ID'''||'''Instructions'''||'''Expected Results'''||'''Date Executed'''||'''Pass/Fail'''||

||<|8> 1. Start Cytoscape <<BR>>2. Import a network file (eg. galFiltered.sif) <<BR>>3. Click on Select from the toolbar||S3.1||1. Click and drag over a portion of the graph <<BR>>2. Choose Edges → Invert edge selection||The edges that were selected should be deselected and the edges that were not initially selected should be highlighted|| ||||

||S3.2||1. Repeat step 1 from S3.1 <<BR>>2. Choose Edges → Hide edge selection||The selected edges should now be invisible|| ||||

||S3.3||Choose Edges → Show all edges||The edges that were hidden in S3.3 should now be visible with all the other edges in the network|| ||||

||S3.4||Choose Edges → Select all edges||All the edges in the network should be selected|| ||||

||S3.5||Choose Edges → Deselect all edges||All the edges in the network should be deselected and not highlighted|| ||||

||S3.6||1. Hold shift and click on 5 nodes <<BR>>2. Choose Edges → Select adjacent edges||All the edges connected to these nodes should be selected|| ||||

||S3.7||1. Select an edge <<BR>>2. Hold Ctrl (or command) and click on a point on the edge <<BR>>3. Repeat step 2 further up the edge <<BR>>4. Click on the edge and drag it into a zig-zag  <<BR>>5. Choose Edges → Smooth selected edges||The edge should change from a zig-zag to a smooth curve|| ||||

||S3.8||1. Select the curved edge created in S3.7 <<BR>>2. Choose Edge → Straighten selected edge||The curved edge should now be a straight zig-zag again|| || ||